Abstract:The soil in front of a shield tunnel face can be pushed toward the ground surface if the support pressure is higher than the threshold that causes blow-out failure of the tunnel face. Most of the failure mechanisms used in the upper-bound analysis of a tunnel face have been derived from rigid-block failure mechanisms that are inconsistent with the failure mode observed in actual engineering practice. This article describes the construction of a new blow-out failure mechanism that is characterized by an arbitrary curve. Based on this failure mechanism and the Hoek–Brown (H-B) nonlinear failure criterion, an objective function that can be used to derive the upper-bound solution of the failure surface for a tunnel face is established in the framework of the upper-bound theorem. Using a variational approach, the equation of the failure surface that makes the objective function reach an extremum is obtained. On the basis of the analytical equation of the failure surface, the shapes of the failure surfaces for different parameters are plotted. By studying the influence of various parameters on the shape of failure surfaces, the changing laws of the shape of the failure surface for different parameters are obtained. To evaluate the validity of the upper-bound solution, the analytical results are compared with the numerical results provided by finite-difference software. By converting the parameters of the H-B failure criterion represented by normal and shear stresses into the parameters of the H-B failure criterion represented by the major and minor principal stresses, a comparison is made for equivalent conditions. The failure surface derived from the upper calculation and the shear-failure surface provided by the numerical simulation are found to be in agreement, which indicates that the method proposed is valid.

Partial collapse mechanism of a horseshoe-shaped tunnel face in layered soils

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Upper Bound Analysis of Tunnel Face Stability in Layered Soils

Face stability analysis of shield-driven tunnels shallowly buried in dry sand using 1-g large-scale model tests

Three-dimensional stability analysis of tunnel face considering the upper partial failure in layered rock masses

Stability Analysis of the Horseshoe Tunnel Face in Rock Masses

Stability Analysis of a Shield Tunnel in Unsaturated Soil Considering the Soil Arch Effect

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

An improved mechanism for partial blowout instability of tunnel face in large slurry shield-driven tunnels

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Analysis of Influence of Deformation Modes of Retaining Structures on Deformation of a Side Shield Tunnel

Analysis of face stability during excavation of Double-O-Tube shield tunnel

Limit Analysis for the Face Stability of a Shallow-Shield Tunnel Based on a Variational Approach to the Blow-Out Failure Mode

Face Stability of Tunnel in Multi-stratum: Limit Analysis and Numerical Simulation

A limit equilibrium model for the reinforced face stability analysis of a shallow tunnel in cohesive-frictional soils

Limit Analysis of Collapse Mechanisms for Tunnel Roofs Subjected to Pore Water Pressure: A Numerical Approach

Analysis on face stability of rectangular cross-sectional shield tunneling based on an improved two-dimensional rotational mechanism

A 3D torus-slice model for limit equilibrium analysis of shield tunnel face under soil arching effect

Three-Dimensional Upper Bound Limit Analysis on the Collapse of Shallow Soil Tunnels considering Roof Stratification and Pore Water Pressure

A 3D rotational silo-torus model for face stability analysis of circular tunnels

Failure mechanism and countermeasures of rainfall-induced collapsed shallow loess tunnels under bad terrain: A case study