Abstract:Purpose Quality of the weld joint produced by high-frequency induction (HFI) welding of steel tubes is attributed to a number of process parameters. There are several important process parameters such as the speed of the welding line, the angle of the approaching strip edges, the physical configuration of the induction coil, impeder, formed steel strip and weld rolls with respect to each other, the pressure of the weld rolls and frequency of the high-frequency current in the induction coil. The purpose of this paper is to develop a 3D model of tube welding process that incorporates realistic material properties and movement of the strip. Design/methodology/approach 3D numerical simulation by the finite element method (FEM) can be used to understand the influence of these process parameters. In this study, the authors have developed a quasi-steady model along with the coupling of electromagnetic and thermal model and incorporation of non-linear electromagnetic and thermal material properties. Findings In this study, 3D FEM model has been established which gives results in accordance with previously published work on induction tube welding. The effect of the Vee-angle and frequency on the temperature profile created in the strip edge during the electromagnetic heating is studied. Practical implications The authors are now able to simulate the induction tube welding process at a more reasonable computational cost enabling an analysis of the process. Originality/value A 3D model has been developed for induction tube welding. A non-linearly coupled system of Maxwell’s electromagnetic equation and the heat equation is implemented using the fixed point iteration method. The model also takes into account non-linear magnetic and thermal material properties. Adaptive remeshing is implemented to optimise mesh size for the electrical skin depth of induced current in the strip. The model also accounts for the high welding-line speeds which influence the mode of heat transfer in the strip.

Multiphysics Simulation of In-Service Welding and Induction Preheating: Part 1

Modeling Heat Transfer During Friction Stir Welding Using a Meshless Particle Method

Three-dimensional numerical study of heat-affected zone in induction welding of tubes

Modeling of heat transfer and fluid flow in the metal being welded during DC and HFPC TIG spot welding

Numerical Simulation of Arc Welding

Numerical simulations of strengthen induction heating with response surface methodology

Numerical simulation of heating process for copper pipe-plate high frequency induction brazing and its application

Numerical Simulation of Tube Manufacturing Consisting of Roll Forming and High-Frequency Induction Welding

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Energy-input-based finite-element process modeling of inertia welding

Numerical simulation of temperature field during high frequency induction heating and its application on brazing of T type copper pipe

Modeling And Simulation Of Induction Heating With Magnetic Flux Concentrator

Numerical and experimental study of electromagnetic induction heating process for bolted flange joints

Numerical simulation and experimental verification of temperature field in induction welding process of CFRTP L-shaped stringer and skin based on magneto-thermal coupling

Induction heating simulation of the waveguide assembly elements

Electromagnetic-Thermal Coupling Simulation by ANSYS Multiphysics of Induction Heater

Fully Coupled Magneto-Thermo-structural Analysis by Morphing Method and Its Application to Induction Heating Process for Plate Bending

A customized system for simulation of welding thermal process

Collaborative Simulation of Nugget Growth and Process Signals for Resistance Spot Welding

Numerical simulation of thermal and residual stress fields induced by lined pipe welding

Numerical Simulation Studies in Tungsten Inert Gas Welding of Inconel 718 Alloy Sheet