Abstract:Purpose Quality of the weld joint produced by high-frequency induction (HFI) welding of steel tubes is attributed to a number of process parameters. There are several important process parameters such as the speed of the welding line, the angle of the approaching strip edges, the physical configuration of the induction coil, impeder, formed steel strip and weld rolls with respect to each other, the pressure of the weld rolls and frequency of the high-frequency current in the induction coil. The purpose of this paper is to develop a 3D model of tube welding process that incorporates realistic material properties and movement of the strip. Design/methodology/approach 3D numerical simulation by the finite element method (FEM) can be used to understand the influence of these process parameters. In this study, the authors have developed a quasi-steady model along with the coupling of electromagnetic and thermal model and incorporation of non-linear electromagnetic and thermal material properties. Findings In this study, 3D FEM model has been established which gives results in accordance with previously published work on induction tube welding. The effect of the Vee-angle and frequency on the temperature profile created in the strip edge during the electromagnetic heating is studied. Practical implications The authors are now able to simulate the induction tube welding process at a more reasonable computational cost enabling an analysis of the process. Originality/value A 3D model has been developed for induction tube welding. A non-linearly coupled system of Maxwell’s electromagnetic equation and the heat equation is implemented using the fixed point iteration method. The model also takes into account non-linear magnetic and thermal material properties. Adaptive remeshing is implemented to optimise mesh size for the electrical skin depth of induced current in the strip. The model also accounts for the high welding-line speeds which influence the mode of heat transfer in the strip.

Modeling of heat transfer and fluid flow in the metal being welded during DC and HFPC TIG spot welding

Modeling Heat Transfer During Friction Stir Welding Using a Meshless Particle Method

Model for Numerical Simulation of Temperature Field and Bead Profile in Hybrid Laser-Arc Welding of T-Joint

Numerical modeling of heat transfer and fluid flow in hybrid laser–TIG welding of aluminum alloy AA6082

Three-dimensional numerical study of heat-affected zone in induction welding of tubes

Mathematical and Computational Modeling of Resistance Spot Welding Solidification Process

Computer Intelligent Numerical Simulation of TIG Welding Using Platy Tungsten Electrode

Multiphysics Simulation of In-Service Welding and Induction Preheating: Part 1

Mathematical Modeling of Energy Distribution in Entering a Beam into the Workpiece Material in the Course of Electron Beam Welding

Advances in Numerical Simulation of High-Speed Impact Welding

Modeling Rapid Solidification and Melting Processes for Multiphase Flows in a Welding Technology Application

Algorithm for calculating the distribution of temperature fields at the stage of input and output of an electron beam in the welding process

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Numerical Analysis and Analytical Modeling of the Spatial Distribution of Heat Flux During Friction Stir Welding

Analysis of Thermal Processes during Friction Stir Welding of Metals

A study of the heat transfer mechanism in resistance spot welding of aluminum alloys AA5182 and AA6014

Estimation of heat source model parameters for partial penetration of TIG welding using numerical optimization method

Quantitative evaluation of SPH in TIG spot welding

Simulation of Temperature Field in FSW of 6061T6 Aluminum Alloy IGBT Liquid Cooled Radiator Panel

Numerical Simulation of Tube Manufacturing Consisting of Roll Forming and High-Frequency Induction Welding

Numerical simulation of thermal and residual stress fields induced by lined pipe welding