Abstract:The geometry of joints has a significant influence on the mechanical properties of rocks. To simplify the curved joint shapes in rocks, the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations. In this study, the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample, respectively. To describe the joint geometry, the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models. For comparison tests, the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method. The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints. The presence of joints reduces the uniaxial compressive strength (UCS), elastic modulus, and released acoustic emission (AE) energy of rocks by 37%–67%, 21%–24%, and 52%–90%, respectively. Compared to the simplified joint sample, the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints. The UCS, accumulative released AE energy, and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample. The UCS value of the simplified joint sample (i.e. 38.5 MPa) is much lower than that of the CT-based sample (i.e. 72.3 MPa). Additionally, the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample. CT scanning provides a reliable means to visualize the joints in rocks, which can be used to verify the reliability of photogrammetry techniques. The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.

Technical path of model reconstruction and shear wear analysis for natural joint based on 3D scanning technology

Method for Visualizing the Shear Process of Rock Joints Using 3D Laser Scanning and 3D Printing Techniques

Experimental Technology for the Shear Strength of the Series-Scale Rock Joint Model

Historical shear deformation of rock fractures derived from quantitative three-dimensional description of fracture surfaces on digital outcrop models (DOMs)

Three-dimensional finite element simulation and reconstruction of jointed rock models using CT scanning and photogrammetry

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

3D Morphology Reconstruction of Rock Joints from 2D Profile Measurement by a Profilograph

Novel Intelligent Approach for Peak Shear Strength Assessment of Rock Joints on the Basis of the Relevance Vector Machine

Evaluation Method of Local Failure Characteristics for Joint Based on White Light Scanning Technology

Shear behavior of two-order morphology in rock joints

Damage Evolution of Rocks Containing a Set of Cross-Joints Based on Acoustic Emission Characteristics

Shearing Damage Evolution of Natural Rock Joints with Different Wall Strengths

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

Study on Mechanical Model for Postpeak Shear Behavior of Rock Joints Based on Degradation Characteristics of the 3D Morphology

Determination of the shear failure areas of rock joints using a laser scanning technique and artificial intelligence algorithms

Study on Model Structure and Mechanical Anisotropy of Columnar Jointed Rock Mass Based on Three-Dimensional Printing Method

Experimental study on post-peak stick-slip failure of three different rock joints under direct shear tests

Experimental Investigation into the Mechanical Behavior of Jointed Soft Rock Using Sand Powder 3D Printing

Influences of Roughness Sampling Interval and Anisotropy on Shear Failure Mechanism of Rock Joint Surface

Shear damage mechanisms of jointed rock mass: a macroscopic and mesoscopic study

Investigation on Strength and Stability of Jointed Rock Mass Using Three‐dimensional Numerical Manifold Method