Abstract:Three-dimensional (3D) printing has been increasingly applied to experimental research in geotechnical engineering. In this paper, standard cylinder specimens with high and low strength were prepared using 3D-printing sand core technology. The elastic-plastic and rheological mechanical behaviors were experimentally studied. In addition, the similarity and limitations were verified through comparison with natural sandstone, slate, sand-gypsum, claystone, etc. On this basis, a new way to prepare soft-hard interbedded layered rock in geotechnical mechanics was developed. Considering the features of layered rock and the principle of 3D printing, cylindrical and cubic specimens of soft-hard interlayered rock mass with different inclination angles were prepared by controlling the binder content layer by layer. The deformation and strain differences between the soft and hard phases were verified through digital image correlation. In this case, the anisotropic failure evolution mode of soft-hard interbedded rock mass was revealed by the images captured. The structural anisotropy behaviors of 3D-printed soft-hard interbedded rock was also studied. The results agree well with the published experimental and theoretical results. This study introduces a broad prospect of 3D printing sand core technology for future experimental mechanical research on a soft-hard interbedded layered rock mass in geotechnical engineering. This study developed a new method for preparing soft-hard interbedded rock masses based on 3D printing sand core technology. The elastic-plastic and rheological characteristics of 3D-printed soft rock, hard rock, and soft-hard interbedded rock were investigated and compared with a natural layered rock mass. Moreover, the deformation and strain differences between the soft and hard phases were verified from a mesoscopic perspective. The structural anisotropy behaviors and anisotropic failure mode of soft-hard interbedded rock mass were revealed. The results agreed well with the published experimental and theoretical results. Thus, specimens with complex structures, such as soft-hard interbedded rock mass, could be prepared with 3D printing sand core technology. As a result, the mechanical parameters of 3D-printed specimens were close to those of sandy mudstone and claystone rock masses, while the trends of the stress-strain curves of 3D-printed specimens were consistent with natural sandstone rock masses. This study brings a broad prospect for future investigation of the soft-hard interbedded layered rock mass in actual geotechnical engineering.

Experimental Investigation into the Mechanical Behavior of Jointed Soft Rock Using Sand Powder 3D Printing

Investigation of 3D Printing Sand Core Technology on the Mechanical Behaviors of Soft–Hard Interbedded Rock Masses

Method for Visualizing the Shear Process of Rock Joints Using 3D Laser Scanning and 3D Printing Techniques

Experimental Technology for the Shear Strength of the Series-Scale Rock Joint Model

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Effect of fractures on mechanical behavior of sand powder 3D printing rock analogue under triaxial compression

Strength test of 3D printed artificial rock mass with pre-existing fracture

Preliminary Study on Size Effect of Fractured Rock Mass with Sand Powder 3D Printing

Characteristics and mechanism of time on sand powder 3D printing rock analogue: a new method for fractured rock mechanics

Experimental Study on the Fracture Evolution Process of Rock-like Specimens Containing a Closed Rough Joint Based on 3D-Printing Technology

Shear behavior of synthetic rough jointed rock mass with 3D-printed jointing

Experimental research on the glass fiber-reinforced effect and mechanisms of sand powder 3D-printed rock-like materials

In-situ X-CT scanning and numerical modeling on the mechanical behavior of the 3D printing rock

Application and prospects of 3D printing in physical experiments of rock mass mechanics and engineering: materials, methodologies and models

Quantitative description of fracture behavior and mechanical anisotropy of fractured rock mass: Sand 3D printing and DIC explorations

A Comprehensive Experimental Study on Mechanical Behavior, Microstructure and Transport Properties of 3D-printed Rock Analogs

Fundamental Study on Applicability of Powder-Based 3D Printer for Physical Modeling in Rock Mechanics

Experimental study of uniaxial compressive mechanical properties of rough jointed rock masses based on 3D printing

Experimental and Numerical Studies on Mechanical Characteristics and Fracture Behaviours of Jointed Rock with Different Roughness

Application and prospective of sand-type 3D printing material in rock mechanics: a review

Experimental Study on the Size Effect and Anisotropy in Mechanical Properties of Fractured Rock Mass based on 3D Printing