Abstract:Semiconductor photodetectors can work only in specific material-dependent light wavelength ranges, connected with the bandgaps and absorption capabilities of the utilized semiconductors. This limitation has driven the development of hybrid devices that exceed the capabilities of individual materials. In this study, for the first time, a hybrid heterojunction photodetector based on methylammonium lead bromide (MAPbBr3) polycrystalline film deposited on gallium arsenide (GaAs) was presented, along with comprehensive morphological, structural, optical, and photoelectrical investigations. The MAPbBr3/GaAs heterojunction photodetector exhibited wide spectral responsivity, from 540 to 900 nm. The fabrication steps of the prototype device, including a new preparation recipe for the MAPbBr3 solution and spinning, will be disclosed and discussed. It will be shown that extending the soaking time and refining the precursor solution's stoichiometry may enhance surface coverage, adhesion to the GaAs, and film uniformity, as well as provide a new way to integrate MAPbBr3 on GaAs. Compared to the pristine MAPbBr3, the enhanced structural purity of the perovskite on GaAs was confirmed by X-ray Diffraction (XRD) upon optimization compared to the conventional glass substrate. Scanning Electron Microscopy (SEM) revealed the formation of microcube-like structures on the top of an otherwise continuous MAPbBr3 polycrystalline film, with increased grain size and reduced grain boundary effects pointed by Energy-Dispersive Spectroscopy (EDS) and cathodoluminescence (CL). Enhanced absorption was demonstrated in the visible range and broadened photoluminescence (PL) emission at room temperature, with traces of reduction in the orthorhombic tilting revealed by temperature-dependent PL. A reduced average carrier lifetime was reduced to 13.8 ns, revealed by time-resolved PL (TRPL). The dark current was typically around 8.8 × 10-8 A. Broad photoresponsivity between 540 and 875 nm reached a maximum of 3 mA/W and 16 mA/W, corresponding to a detectivity of 6 × 1010 and 1 × 1011 Jones at -1 V and 50 V, respectively. In case of on/off measurements, the rise and fall times were 0.40 s and 0.61 s or 0.62 s and 0.89 s for illumination, with 500 nm or 875 nm photons, respectively. A long-term stability test at room temperature in air confirmed the optical and structural stability of the proposed hybrid structure. This work provides insights into the physical mechanisms of new hybrid junctions for high-performance photodetectors.

A Sensitive UV Photodetector Based on Non-Wide Bandgap MAPbBr 3 Nanosheet

Ultraviolet Photodetectors Based on Nanometer-Thick Films of the Narrow Band Gap Semiconductor PbS

Flexible perovskite nanosheet-based photodetectors for ultraviolet communication applications

Ultraviolet‚ÄźVisible‚ÄźShort‚ÄźWavelength Infrared Broadband and Fast‚ÄźResponse Photodetectors Enabled by Individual Monocrystalline Perovskite Nanoplate

Sensitive Silicon Nanowire Ultraviolet B Photodetector Induced by Leakage Mode Resonances

Ultraviolet‐Visible‐Short‐Wavelength Infrared Broadband and Fast‐Response Photodetectors Enabled by Individual Monocrystalline Perovskite Nanoplate (Small 37/2023)

An Ultrahigh Responsivity Self-Powered Solar-Blind Photodetector Based on a Centimeter-Sized Β-Ga2o3/polyaniline Heterojunction.

Self‐Powered and Highly Efficient Ion‐Diffused MAPbBr3 Perovskite Single Crystal‐Based UV–Vis Photodiode

High‐Performance Ultraviolet Photodetector Based on a Few‐Layered 2D NiPS3 Nanosheet

Leaky Mode Resonance-Induced Sensitive Ultraviolet Photodetector Composed of Graphene/Small Diameter Silicon Nanowire Array Heterojunctions

High-performance UV Detectors Based on 2D CVD Bismuth Oxybromide Single-Crystal Nanosheets

New Ultraviolet Photodetector Based On Individual Nb2o5 Nanobelts

A New Wide Bandgap Organic Semiconductor and Its Application in Organic UV Sensors with Tunable Response Wavelength

Vertically Stacked Short Channel PtSe2/Ultrathin‐Silicon Heterojunction for Fast‐Speed UV Photodetection Application

Ultrabroadband Photodetectors Up to 10.6 Μm Based on 2D Fe3O4 Nanosheets

A versatile photodetector assisted by photovoltaic and bolometric effects

Non‐Ultrawide Bandgap Semiconductor GaSe Nanobelts for Sensitive Deep Ultraviolet Light Photodetector Application

High-performance UV light detector using layered perovskites and textured silicon heterojunction

Sensitive and Ultrabroadband Phototransistor Based on Two-Dimensional Bi2O2Se Nanosheets

Photodetectors Based on MoS 2 /MAPbBr 3 van der Waals Heterojunction

Physical Properties of an Efficient MAPbBr3/GaAs Hybrid Heterostructure for Visible/Near-Infrared Detectors