Self‐Powered and Highly Efficient Ion‐Diffused MAPbBr3 Perovskite Single Crystal‐Based UV–Vis Photodiode

Abida Perveen,Yubing Xu,Syed Muhammad Abubakar,Premkumar Sellan,Wang Xin,Fawad Saeed,Sajid Hussain,Byung Seong Bae,Jianming Zhou,Ying Zhu,Wei Lei
DOI: https://doi.org/10.1002/adom.202302918
IF: 9
2024-04-19
Advanced Optical Materials
Abstract:A thin p–n junction of 4 μm in the MAPbBr3 perovskite single crystal by the diffusion of metallic ions leads to reduced dark, low trap density, greater carrier mobility, high responsivity, and tremendous device stability. The thin p–n junction‐based photodiode can detect extremely low illumination intensities in the ultraviolet–visible (UV–Vis) range with high precision and fast response time under 0 V applied voltage. The perovskite single crystals (PSC) produced by solution‐processed metallic ions doping have a thick p–n junction (greater than 10 μm). Meanwhile, to achieve high responsivity, the carrier drift length (μτE) has to be larger than the dimensions of the detector. If the p–n junction is quite thick, a high bias voltage is required. For the practical application of photodiode, it is imperative to find a means to generate a thin p–n junction. A productive technique is suggested for forming a thin p–n junction by diffusing metallic ions, resulting in a longer drift length of the carrier than the depletion width. Thinner p–n junction leads to reduced dark current density (0.5 μA cm−2), low trap density (5.71 × 108 cm−3), high mobility (417 cm2 V−1 s−1), and hence increased responsivity (77.69 A W−1) for 30 μW cm−2 UV illumination under a low applied voltage of −15 V. A quick response time with a rise/fall duration of 22 ms/30 ms under 0 V and long‐term stability for over 3 months in ambient airis achieved. To comprehend the performance with the thinner p–n junction‐based photodiodes, the results under UV–Vis illumination are examined and compared. The outcomes hint at a method that holds promise for producing efficient photodiodes.
materials science, multidisciplinary,optics
What problem does this paper attempt to address?