Abstract:<p>An experimental study is conducted to investigate the multi-length scale evolution from micro/nano-structural arrays to V-grooves by femtosecond laser-irradiations, considering the effects of laser polarization and the number of scans on the periodic features and the micro/nano-structures. It is found that the evolution from micro/nano-structural arrays to V-grooves is gradual as the laser fluence, scan speed or the number of scans is increased. Laser-induced surface instability, hatching effects, Coulomb explosions, melting, and evaporation are found to be the underlying mechanisms for the micro/nano structural formation. As the laser fluence increases, the agglomerated nanoparticles change from sparse to dense, so that the boundary between the LIPSS (laser-induced periodic surface structures) becomes less obvious. The oxygen (O) elements attached to the surface of nanoparticles increase with an increase in laser fluence. A high-spatial-frequency LIPSS (HSFL) can transform to low-spatial-frequency LIPSS (LSFL) as the laser fluence excesses the ablation threshold, while the spatial period of the HSFL and LSFL is independent of fluence. It is shown that the irradiated surface evolves from a near-damage-free zone to one with a recast layer and thermal-induced micro-cracks, defined as heat-affected zones (HAZ). Near thermal damage-free micro/nano-structural arrays with different orientations on the sidewalls of the grooves are fabricated at close to the laser ablation threshold by multi-pass scanning. A self-organizing model is developed which shows that laser polarization leads to the asymmetry of energy distribution and the structural array is arranged along the main direction of energy flow. The model analysis shows a good agreement with experimental results and provides an efficient means to understand the interaction between femtosecond laser and silicon carbide (SiC).</p>

High-quality structures on 4H-SiC fabricated by femtosecond laser LIPSS and chemical etching

Femtosecond laser two-beam interference applied to 4H-SiC surface hierarchical micro-nano structure fabrication

Study of Femtosecond Laser Ablation Effect on Micro-Processing for 4H-SiC Substrate

Femtosecond Laser Nanostructuring on a 4H-Sic Surface by Tailoring the Induced Self-Assembled Nanogratings

Investigation of structural transformation and residual stress under single femtosecond laser pulse irradiation of 4H–SiC

Surface Micromorphology and Nanostructures Evolution in Hybrid Laser Processes of Slicing and Polishing Single Crystal 4H-Sic

Ultrafast pulsed laser stealth dicing of 4H-SiC wafer: Structure evolution and defect generation

Deepening of nanograting structures on Si by a two-step laser spatial-selective amorphization strategy combined with chemical etching

Femtosecond Laser-Induced Phase Transformation on Single-Crystal 6H-SiC

Experimental Investigation on Ablation of 4H-SiC by Infrared Femtosecond Laser

Two-dimensional periodic surface nanotexturing of 6H-SiC by ultrashort laser pulses

Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation

Centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates using a femtosecond laser with square-shaped Flat-Top focus spots

Laser microstructuring of Si surfaces for low-threshold field-electron emission

Experimental study on femtosecond laser ablation of 4H-SiC substrate

Study of Femtosecond Laser Ablation and Polishing Process on 4H-SiC Substrate

Laser slicing of 4H-SiC wafers based on picosecond laser-induced micro-explosion via multiphoton processes

High-quality micro/nano structures of 4H-SiC patterning by vector femtosecond laser

Cylindrically Focused Nonablative Femtosecond Laser Processing of Long‐Range Uniform Periodic Surface Structures with Tunable Diffraction Efficiency

Fabrication of Nanostructures on 6H SiC Crystal Induced by Femtosecond Laser

Femtosecond laser induced periodic surface structures on crystals: Formation, evolution and application