Abstract:Poly(methylmethacrylate) (PMMA) has been widely used in the fields of optical instruments, aviation and auto industry, construction industry, advertising and decoration industry due to its optical transparency, low cost, low toxicity, and less fragile property. Recently it has been exploited to fabricate microfluidic chips. Region-selective metallization of PMMA surfaces are frequently required to improve the surface properties of PMMA and to integrate micro metal devices in PMMA microfluidic chips. This article presents our recent study on region-selective metalization of PMMA by means of UV/O-3-based surface modification in combination of region-selective electroless plating. Deep UV-lights, ozone, and deep UV-lights in cooperation with ozone were compared with respect to the efficiency of hydrophilization of the PMMA surface. It was observed with water contact angle measurements that only synchronized deep UV and ozone treatment can turn the PMMA surface from hydrophobic to hydrophilic effectively. Attenuated total reflection fourier transform infrared spectra revealed that polar moieties such as carboxyl groups were generated on the UV/O-3 treated areas. These polar moieties served as the anchors for further chemical reactions including amination of the carboxyl groups with ethylenediamine, adsorption of chloraurate anion onto the amine groups, and reduction of the Au(III) in the chloraurate anion to Au(0) by borohydride. These reactions led to the formation of the catalysis center of gold nano-particles on the UV-irradiated areas, which is indispensable for region-selective electroless plating. After optimization of the experimental conditions, a novel method for preparation of micro metal devices on PMMA surface has been established. With the printed poly(ethylene terephthalate) (PET) film serving as the primary photo mask, the achievable resolution of the prepared micro metal patterns was 50 mu m or less. The deposited metal films adhered to the PMMA surface so strongly that they could hardly be tore off with adhesive tapes. Micro gold electrodes, micro gold electric heaters, micro copper electrodes, etc. were demonstrated to be prepared on PMMA surfaces, and their physical and electro-chemical properties were characterized.

Poly(methyl methacrylate) - Palladium clusters nanocomposite formation by supersonic cluster beam deposition: a method for microstructured metallization of polymer surfaces

Developing A Well-Adhered Ni/P Alloy Film On The Surface Of Silicone Elastomer For Shielding Electromagnetic Interferences

Fabrication and Characterization of Ag/polymer Nanocomposite Films Through Layer-by-layer Self-Assembly Technique

Co-Continuous Polymeric Nanostructures Via Simple Melt Mixing of Ps/Pmma

Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

Region-selective Metalization of Poly(methylmethacrylate) Surface Based on UV/ozone Surface Modification

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Selective Silver Nanocluster Metallization on Conjugated Diblock Copolymer Templates for Sensing and Photovoltaic Applications

Correlating Optical Reflectance with the Topology of Aluminum Nanocluster Layers Growing on Partially Conjugated Diblock Copolymer Templates

Modification of Polymeric Surfaces with Ultrashort Laser Pulses for the Selective Deposition of Homogeneous Metallic Conductive Layers

Selective Metallization of Polymers: Surface Activation of Polybutylene Terephthalate (PBT) Assisted by Picosecond Laser Pulses

In situ Synthesis of Metal Nanoparticle Embedded Free Standing Multifunctional PDMS Films

PMMA nanocolumn array fabricated by catalytic etching and nanomolding technique

Fabrication of Polymethyl Methacrylate (PMMA) Hydrophilic Surfaces Using Combined Offset-Tool-Servo Flycutting and Hot Embossing Methods

Flexible and biocompatible microelectrode arrays fabricated by supersonic cluster beam deposition on SU-8

Polymer Nanocomposite Containing Palladium Nanoparticles: Synthesis, Characterization, and Properties

Metallization of polypropylene substrates through surface functionalization and physical vapor deposition of chromium coatings

Modification of polymethylmethacrylate under irradiation of the SEM electron beam

Exploiting the Combination of Displacement and Chemical Plating for a Tailored Electroless Deposition of Palladium Films on Copper

Selective Electroless Metallization of Micro- and Nanopatterns via Poly(dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications.

Near-Surface Nanostructuring of Polymethylmethacrylate by Silicon Ion Implantation