Abstract:All-solid-state batteries (ASSBs) with Li metal anodes or Si anodes are promising candidates to achieve high energy density and improved safety, but they suffer from undesirable lithium dendrite growth or huge volume expansion, respectively. Here we synthesize a hard-carbon-stabilized Li–Si alloy anode in which sintering of Si leads to the transformation of micro-metre particles into dense continuum. A 3D ionic-electronic-conductive network composed of plastically deformable Li-rich phases (Li 15 Si 4 and LiC 6 ) that enlarges active area and relieves stress concentration is created in the anode, leading to improved electrode kinetics and mechanical stability. With the hard-carbon-stabilized Li-Si anode, full cells using LiCoO 2 or LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes and Li 6 PS 5 Cl electrolyte achieve favourable rate capability and cycle stability. In particular, the ASSB with LiNi 0.8 Co 0.1 Mn 0.1 O 2 at high loading of 5.86 mAh cm −2 delivers 5,000 cycles at 1 C (5.86 mA cm −2 ), demonstrating the potential of using hard-carbon-stabilized Li–Si alloy anodes for practical applications of ASSBs.

What problem does this paper attempt to address?

The paper primarily aims to address the key issues faced when using lithium metal anodes or silicon-based anodes in all-solid-state batteries (ASSBs), including the safety hazards caused by lithium dendrite growth and the significant volume expansion of silicon-based anodes during charge and discharge cycles. Specifically, the paper proposes the following innovations: 1. **Synthesis of Hard Carbon-Stabilized Lithium-Silicon Alloy Anode**: A hard carbon-stabilized lithium-silicon alloy anode was prepared by sintering silicon particles. In this anode, micron-sized silicon particles transform into a dense continuum and form a 3D ion-electron conductive network composed of plastically deformable lithium-rich phases (such as Li15Si4 and LiC6). This helps to expand the active area and alleviate stress concentration, thereby improving the kinetic performance and mechanical stability of the electrode. 2. **Enhancing the Performance of All-Solid-State Batteries**: The all-solid-state lithium battery assembled with the aforementioned hard carbon-stabilized lithium-silicon alloy anode exhibited good rate capability and cycling stability when using LiCoO2 or LiNi0.8Co0.1Mn0.1O2 cathode materials and Li6PS5Cl electrolyte. Particularly, for high-loading scenarios (5.86 mAh cm⁻²), the battery could stably cycle 5000 times at a current density of 1 C (5.86 mA cm⁻²), demonstrating the potential of this anode material in practical applications. 3. **Addressing Issues with Existing Methods**: The paper points out that existing strategies to improve the stability of lithium metal anodes (such as artificial solid electrolyte interphase layers and protective layers) struggle to meet the requirements of high loading and high current density simultaneously, or still face the issue of lithium dendrite growth. While silicon-based anodes have abundant reserves, low cost, and high specific capacity at room temperature, they also face structural instability and slow kinetics in practical applications. In summary, this research aims to significantly enhance the energy density, power density, and safety of all-solid-state lithium batteries by developing a new hard carbon-stabilized lithium-silicon alloy anode, providing important technical support for the development of next-generation high-performance energy storage devices.

Hard-carbon-stabilized Li–Si anodes for high-performance all-solid-state Li-ion batteries

All-electrochem-active silicon anode enabled by spontaneous Li-Si alloying for ultra-high performance solid-state batteries

Development of Si-Based Anodes for All-Solid-State Li-Ion Batteries

High‐Performance Sheet‐Type Sulfide All‐Solid‐State Batteries Enabled by Dual‐Function Li4.4Si Alloy‐Modified Nano Silicon Anodes

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

A ′′Reinforced Concrete′′ Structure of Silicon Embedded into an In Situ Grown Carbon Nanotube Scaffold as a High-Performance Anode for Sulfide-Based All-Solid-State Batteries

Manipulating charge-transfer kinetics and flow-domain LiF-rich interphase to enable high-performance microsized silicon-silver-carbon composite anode for solid-state batteries

Nano Silicon Anode without Electrolyte Adding for Sulfide‐Based All‐Solid‐State Lithium‐Ion Batteries

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

All-Solid-State Lithium-Sulfur Batteries of High Cycling Stability and Rate Capability Enabled by a Self-Lithiated Sn-C Interlayer

Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film

Stable all-solid-state battery enabled with Li6.25PS5.25Cl0.75 as fast ion-conducting electrolyte

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Enabling robust structural and interfacial stability of micron-Si anode toward high-performance liquid and solid-state lithium-ion batteries

Monothetic and conductive network and mechanical stress releasing layer on micron-silicon anode enabling high-energy solid-state battery

Lithium anode interlayer design for all-solid-state lithium-metal batteries

An Air‐Stable and Dendrite‐Free Li Anode for Highly Stable All‐Solid‐State Sulfide‐Based Li Batteries

Solid-State Silicon Anode with Extremely High Initial Coulombic Efficiency

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

LiAlO2-coated LiNi0.8Co0.1Mn0.1O2 and chlorine-rich argyrodite enabling high-performance all-solid-state lithium batteries at suitable stack pressure