Abstract:The current generation of ultrahigh temperature ceramic precursors typically encounters obstacles in achieving high ceramic yields ( < 40 wt.%) due to the challenges in integrating significant amounts of boron, which hampers their conversion into boride-based ultrahigh temperature ceramics. To tackle these challenges, a serious of pioneering liquid multi-component hafnium-containing ceramic SiHfCB precursors (with different Hf/Si ratios) have been developed. These novel precursors are featured with stable molecular structure and high ceramic yield which were successfully created through a novel one-pot polymerization process. They present in liquid form and their structure is characterized by C-C bonds forming its main chain with branched chains of O-Si-O, Si-O-Hf, Si-O-B, and B-O-Hf which have untapped advantages including uniform component dispersion, and excellent fluidity. The ceramic yield of SiHfCB precursor with Hf/Si of 0.2 is remarkably up to 68.6 wt.% at 1500 degrees C, and their Hf content exceeded 50 wt.%. Of particular interest, the pyrolyzed product HfB2 -SiC nanopowders derived from the SiHfCB precursor with Hf/Si of 0.2, consist of nanopowders in the 40-60 nm range with a density of 5.23 g cm(-4). Remarkably, this material demonstrates exceptional performance in ultrahigh temperature oxygen-containing environments at 2500 degrees C, showing near-zero ablation with a linear ablation rate of just 2.5 x 10(-4) mm s(-1) . Post-ablation analysis of the microstructure reveals that the formation of a lava-like HfO2 and HfO2 -SiO2 oxide layer effectively blocks oxygen penetration and provides excellent oxidation resistance. The innovative SiHfCB hafnium-containing ceramic precursor offers a groundbreaking solution for the preparation of lightweight ultrahigh-temperature ceramics. This development is poised to provide robust technical support for the use of ultrahigh temperature ceramics in non-ablative thermal protective systems, particularly in the construction of hypersonic vehicles, where ultrahigh temperature resilience is crucial. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Ultra-high temperature resistance of one-dimensional hafnium carbide wrapped with pyrolytic carbon up to 2450 °C

Insights into the Bond Behavior and Mechanical Properties of Hafnium Carbide under High Pressure and High Temperature

Effects of HfC/PyC Core-Shell Structure Nanowires on the Microstructure and Mechanical Properties of Hf1-xZrxC Coating

Efficient Fabrication of Light Cf/SiHfBOC Composites with Excellent Thermal Shock Resistance and Ultra-High-temperature Ablation Up to 1800 °C

Properties and Microstructure of an HfB2-HfC-SiC Ultra High Temperature Ceramics

Synthesis and Characterization of Single Crystalline Hafnium Carbide Nanowires

Nanosized Hf6Ta2O17 particles reinforced HfC ceramic coating for high temperature applications

Ultrahigh Temperature Ablation Resistant HfB2-SiC Composites: from Liquid SiHfCB Precursor Synthesis to Light Weight Bulk Preparation and Characterization

Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure

Low-temperature Rapid Synthesis of Ultrafine Hafnium Carbide Ceramic Powders

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

Preparation of silicon-nitride ceramic fibers with hafnium compounds loaded on the surface and the high temperature properties

Fabrication of low-density carbon-bonded carbon fiber composites with an Hf-based coating for high temperature applications

Advances in ultra-high temperature ceramics, composites, and coatings

Synthesis and Characterization of Nano-Crystalized HfC Based on an Aqueous Solution-Derived Precursor.

High-entropy Metal Carbide Nanowires

Novel nitrogen-doped hafnium carbides for advanced ablation resistance up to 3273 K

Densification, Strengthening and Toughening in Hafnium Carbide with the Addition of Silicon Carbonitride

Elasticity, mechanical and thermal properties of polycrystalline hafnium carbide and tantalum carbide at high pressure

Oxidation/ablation behaviors of hafnium carbide-silicon carbonitride systems at 1500 and 2500 C

Thermoablative behaviors of designable hafnium carbonitride integrated with lattice of tungsten upon 3273K