Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Double-Sided Bonding Process Enables X-ray Flat Panel Detectors

Research Progress of X-Ray Detection and Imaging Based on Emerging Metal Halide Semiconductors and Scintillators

Halide Perovskites: A Dark Horse for Direct X‐ray Imaging

High-Performance Flat-Panel Perovskite X-ray Detectors Enabled by Defect Passivation in Ruddlesden-Popper Perovskites

Polycrystalline hybrid perovskite with enhanced ordered crystal domains for sensitive X-ray detection

Facile Strategy for Facet Competition Management to Improve the Performance of Perovskite Single-Crystal X-ray Detectors.

Wafer-Scale Photolithography-Pixeled Pb-Free Perovskite X-ray Detectors.

Recent Advances on Two-Dimensional Metal Halide Perovskite X-Ray Detectors

Monolithic integration of perovskite heterojunction on TFT backplanes through vapor deposition for sensitive and stable x-ray imaging

Supple Formamidinium-Based Low-Dimension Perovskite Derivative for Sensitive and Ultrastable X-ray Detection

An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

A Wet-Fusing Assembly Strategy for Forming Low Dark Current 2D/3D Perovskite X-Ray Detector on a Thin Film Transistor Backplane

Flexible, active-matrix flat-panel image sensor for low dose X-ray detection enabled by integration of perovskite photodiode and oxide thin film transistor

Co-axial silicon/perovskite heterojunction arrays for high-performance direct-conversion pixelated X-ray detectors

Monolithic Integration of Hybrid Perovskite Single Crystals with Heterogenous Substrate for Highly Sensitive X-ray Imaging

Synergistic strain engineering of perovskite single crystals for highly stable and sensitive X-ray detectors with low-bias imaging and monitoring

Evaporated Perovskite Thick Junctions for X-Ray Detection

Flexible, Printable Soft‐X‐Ray Detectors Based on All‐Inorganic Perovskite Quantum Dots

Low‐Cost and Large‐Area Hybrid X‐Ray Detectors Combining Direct Perovskite Semiconductor and Indirect Scintillator

Perovskite-Based X-ray Detectors

Flexible Soft X‐Ray Image Sensors based on Metal Halide Perovskites With High Quantum Efficiency