Abstract:Purpose: Fast kV-switching (FKS) and dual-layer flat-panel detector (DL-FPD) technologies have been actively studied as promising dual-energy solutions for FPD-based cone-beam computed tomography (CBCT). However, CBCT spectral imaging is known to face challenges in obtaining accurate and robust material discrimination performance due to the limited energy separation. To further improve CBCT spectral imaging capability, this work aims to promote a source-detector joint spectral imaging solution which takes advantages of both FKS and DL-FPD, and to conduct a feasibility study on the first tabletop CBCT system with the joint spectral imaging capability developed. Methods: A noise performance analysis using the Cramér-Rao lower bound (CRLB) method is conducted. The CRLB for basis material after a projection-domain material decomposition is derived, followed by a set of numerical calculations of CRLBs, for the FKS, the DL-FPD and the joint solution, respectively. In this work, the first FKS and DL-FPD jointly enabled multi-energy tabletop CBCT system, to the best of our knowledge, has been developed in our laboratory. To evaluate its spectral imaging performance, a set of physics experiments are conducted, where the multi-energy and head phantoms are scanned using the 80/105/130kVp switching pairs and projection data are collected using a prototype DL-FPD. To compensate for the slightly angular mismatch between the low- and high-energy projections in FKS, a dual-domain projection completion scheme is implemented. Afterwards material decomposition is carried out by using the maximum-likelihood method, followed by reconstruction of basis material and virtual monochromatic images. Results: The numerical simulations show that the joint solution can lead to a significant improvement in energy separation and lower noise levels. The physics experiments confirmed the feasibility and superiority of the joint spectral imaging, whose CNRs of the multi-energy phantom were boosted by an average improvement of 21.9%, 20.4% for water and 32.8%, 62.8% for iodine when compared with that of the FKS and DL-FPD in fan-beam and cone-beam experiments, respectively. Conclusions: A feasibility study of the joint spectral imaging for CBCT by utilizing both the FKS and DL-FPD was conducted, with the first tabletop CBCT system having such a capability being developed, which exhibits improved spectral imaging performance as expected.

A high sensitivity wide bandwidth spectral system for multiple K-edge imaging

Simultaneous X-Ray Fluorescence and K-edge CT Imaging with Photon-Counting Detectors

The Hidden K-edge Signal in K-edge Imaging

Reliable extraction of x-ray refraction and dark-field signals with a large field of view, multi-modal scanning system at spectral energies up to 150 kVp

Fast kV-switching and dual-layer flat-panel detector enabled cone-beam CT joint spectral imaging

Edge-illumination spectral phase-contrast tomography

High-Sensitivity Iodine Imaging by Combining Spectral CT Technologies

Spectral micro-CT for simultaneous gold and iodine detection, and multi-material identification

Multi-Contrast CT Imaging with a Prototype Spatial-Spectral Filter

Optimized Energy Thresholds in a Spectral Computed Tomography Scan for Contrast Agent Imaging

K-edge Imaging Based on a Thomson Scattering X-Ray Source

Novel algorithm for qualitative and quantitative material analysis by the K-edges for photon-counting computed tomography

Sensitivity Enhancement of (Hyper-)CEST Image Series by Exploiting Redundancies in the Spectral Domain

An Optimized K-Edge Signal Extraction Method for K-Edge Decomposition Imaging Using a Photon Counting Detector

Simultaneous iodine and barium imaging with photon-counting CT

Design and development of the DE-SPECT system: a clinical SPECT system for broadband multi-isotope imaging of peripheral vascular disease

Ultrahigh-Resolution K-Edge Imaging of Coronary Arteries With Prototype Deep-Silicon Photon-Counting CT: Initial Results in Phantoms

Speckle-based imaging (SBI) applications with spectral photon counting detectors at the newly established OPTIMATO (OPTimal IMAging and TOmography) laboratory

K-edge subtraction vs. A-space processing for x-ray imaging of contrast agents: SNR

Block-matching and 3D filtering algorithm in X-ray image with photon counting detector using the improved K-edge subtraction method

Ultra-High Spatial Resolution, Multi-Energy CT using Photon Counting Detector Technology