Abstract:Effective thermal conduction between solid interfaces has emerged as a major bottleneck in heat dissipating heat from new-generation high-performance electronics. Gallium-based liquid metals (LMs), known for their high thermal conductivity, are gaining significant traction as thermal interface materials (TIMs) for enhanced thermal management. In this work, to address the key issues facing the application of gallium-based LMs as TIMs, including the lack of composition ratio data, poor coating performance and the need for improved thermal conductivity, two types of gallium-based LM-TIMs (Ga-In binary LM-TIMs and Ga-In-Sn ternary LM-TIMs) with different composition ratios were experimentally prepared, investigated and optimized. The thermal conductivities of the LM-TIMs at different temperatures (80 - 120 ℃) were tested, and the application reliability of the LM-TIMs was optimized by continuously destructing the oxide layer and filling micro copper particles. The influence of optimization parameters such as the duration of the destruction of oxide layer, the filling ratios of the particles and the particle size on the operation performance of the LM-TIMs was studied and analyzed. The results showed that the LM-TIMs exhibited excellent thermal conductivities of 29.6 - 38.5 W/(m·K), and the thermal conductivity increased with indium mass fraction and decreased with tin mass fraction. Significant improvements in coating performance were observed with the increase of the duration of destructing oxide layer, but it led to a reduction in thermal conductivity. Balancing coating performance and thermal conductivity, it was found that 30 min was the ideal duration. The filling of micro particles made up for the reduced thermal conductivity, and higher filling ratios and smaller particle sizes achieved better enhancement. In the experiment, a filling ratio of 5 % was appropriate because solidification occurred in LM-TIMs at higher filling ratios which weakened the thermal conductivity. This work provided valuable reference for the application and optimization of high thermal conductive gallium-based LM-TIMs.

Liquid metal contact as possible element for thermotunneling

Experimental Investigation on Optimization of the Performance of Gallium-Based Liquid Metal with High Thermal Conductivity As Thermal Interface Material for Efficient Electronic Cooling

Quantized thermal conductance in metallic heterojunctions

Thermal and Electrical Properties of Liquid Metal Gallium During Phase Transition

Fabrication of liquid metal/diamond hybrid thermal interface materials with high thermal conductivity and low flowability

Liquid Metal Composites with Enhanced Thermal Conductivity and Stability Using Molecular Thermal Linker

High Efficiency Thin Film Superlattice Thermoelectric Cooler Modules Enabled by Low Resistivity Contacts

Improving the thermal, mechanical, and insulating characteristics of thermal interface materials with liquid metal-based diphase structure

Minimizing Interface Thermal Resistance Via Laser Surface Micropatterning for Enhancing Wetting of Gallium-Based Liquid Metal with Copper

Thermoelectricity at a gallium-mercury liquid metal interface

Improvement of Mechanical and Thermoelectric Properties of AgCuTe by Pinning Effect and Enhanced Liquid-Like Behavior via SiC Alloying

Low-Melting-Point Liquid Metal Convective Heat Transfer: A Review

Through Si vias using liquid metal conductors for re-workable 3D electronics

Gallium-Based Liquid Metal Amalgams: Transitional-State Metallic Mixtures (transm2ixes) with Enhanced and Tunable Electrical, Thermal, and Mechanical Properties

Electrical and thermal characterisation of liquid metal thin-film Ga[Formula: see text]O[Formula: see text]-SiO[Formula: see text] heterostructures

Long-Term Corrosion of Eutectic Gallium, Indium, and Tin (EGaInSn) Interfacing with Diamond

Galinstan Liquid Metal Electrical Contacts for Monolayer-Modified Silicon Surfaces

Hard Copper Wetting with Liquid Indium in Ultrahigh Vacuum and Gaseous Medium and Interfacial Energy Calculation at Different Temperature

A Performance-Enhanced Liquid Metal-Based Microheater with Parallel Ventilating Side-Channels

Effects of chemical intermixing on electrical and thermal contact conductances at metallized bismuth and antimony telluride interfaces