Abstract:Electromechanical devices require functional materials possessing excellent piezoelectric properties, good thermal stability, and high electromechanical coupling coefficients. To modulate the piezoelectric, dielectric, and electromechanical characteristics of 0.89Pb(Hf0.47Ti0.53)O3-0.11Pb(In1/2Nb1/2)O3 (PHT-PIN) piezoelectric ceramics, heterovalent ions of lithium (Li) and tungsten (W) were doped through a traditional solid-phase reaction approach. On the one hand, large lattice distortions caused by the doped W6+ resulted in the shortening of BO bonds while an increase in the local displacement of B-site ions. Moreover, a mismatch occurred for the oxygen octahedral dimensions, and a subsequent disruption of the long-ranged ordered ferroelectric domains was observed, which resulted in the formation of microdomains. On the other hand, the changes in the concentration of oxygen vacancy defects induced by the Li and W doping inside the ceramic were comprehensively analyzed. The decrease in the concentration of oxygen vacancies was found to be accompanied by the enhancement of piezoelectric properties of the material. Excellent comprehensive performance (piezoelectric coefficient d 33 = 655 pC N−1, Curie temperature T c = 321.1 °C, dielectric constant ε r = 3352.31, electromechanical coupling coefficient k p = 0.67, and residual polarization strength P r = 55 μC cm−2) was obtained for 0.2 mol % doping amount of Li+ and W6+ ions. This work, therefore, proposes a novel strategy for the origin of piezoelectric properties and inspires doping of other heterovalent ions to improve the piezoelectric properties of ceramics. It further promotes the development of Pb-based piezoelectric ceramics for electromechanical devices that can efficiently operate under high-temperature environments.

Superior Electromechanical Compatibility in Lead-Free Piezoceramics with Mobile Transition-Metal Defects

Defect Engineering of Lead-Free Piezoelectrics with High Piezoelectric Properties and Temperature-Stability.

Sm and Mn Co-Doped PMN-PT Piezoelectric Ceramics: Defect Engineering Strategy to Achieve Large D33 and High Qm

Significantly enhanced mechanical quality factor of acceptor-doped quadruple point composition in lead-free Ba(Zr,Ti)O3 ceramics

Excellent Piezoelectric Response and Low Dielectric Loss of PIN-PHT Ceramics Obtained Through Synergy of Defect Engineering and Localized Heterostructure

Isolated‐Oxygen‐Vacancy Hardening in Lead‐Free Piezoelectrics

Evolving Electromechanical Properties of Defect Engineered Pb(Zr,Ti)O3-based Piezoceramics

Modification of domain construction in PNN-PIN-PT piezoelectric ceramics for high electromechanical performance using defect engineering

Outstanding electromechanical performance in piezoelectric ceramics via synergistic effects of defect engineering and domain miniaturization

Enhanced Piezoelectric Response Attained by Defect Dipoles in BiFeO3-based Lead-Free Ceramics

Enhancing the piezoelectric properties and thermal stability of PMN-PMS-PSZT high-power piezoelectric ceramics through defect engineering

Defect Engineering with Rational Dopants Modulation for High-Temperature Energy Harvesting in Lead-Free Piezoceramics

Effects of heterovalent ions doping-induced oxygen octahedral distortion and defect chemical change on piezoelectric characteristics and thermal stability of PHT-PIN ceramics

Enhanced Electromechanical Properties in MnCO3‐modified Pb(Ni,Nb)O3–PbZrO3–PbTiO3 Ceramics Via Defect and Domain Engineering

Defect Engineering in Lead Zirconate Titanate Ferroelectric Ceramic for Enhanced Electromechanical Transducer Efficiency

Recent Progress on Defect Dipoles Characteristics in Piezoelectric Materials

Sm2O3 and MnO2 codoped PMN-PZT ceramics with both high mechanical quality factor and piezoelectric properties

Origin of High Comprehensive Electromechanical Properties of Novel Donor and Acceptor–codoped PMN–30PT Ceramics

Defects Engineered Ferroelectricity and Electrocaloric Effect in Pb0.7Ba0.3ZrO3 Ceramics

Evolution of electromechanical properties in Fe-doped (Pb,Sr)(Zr,Ti)O3 piezoceramics

Piezoelectric Ceramic Hardening Through Defect Distribution Optimization in Multicomponent Systems