Abstract:Heterovalent doped (K0.48-0.07x Na0.52-0.43x Bi0.5x )(Nb0.95-0.95x Sb0.05-0.05x Zr x )O3 ceramics were fabricated using conventional solid-state reaction. Then, the phase structures, dielectric, ferroelectric, and electric-strain properties were investigated. The compositions were tuned to be located at polymorphic phase boundary with increasing heterovalent Bi3+ and Zr4+ doping levels. A large strain of 0.19% was obtained at relatively low electric fields of 30 kV/cm in the composition of x = 0.04. The normalized large-signal d 33* values were approximately 633 pm/V under a low driving electric field of 30 kV/cm, which were comparable or larger than the values reported for other lead-free families. The large strains obtained can be attributed to the formation of nanodomains and high-density domain walls, which were confirmed by the observations of domain morphology using transmission electron microscopy (TEM) technique. Excellent temperature stability of the strain properties of the x = 0.04 sample could be ascribed to the sluggish behaviour for the local structural heterogeneity in heterovalent-ion doped KNN ceramic. Theoretical simulations revealed that the Zr4+ produce the local stress at the BO6 octahedra and Bi3+ could yield off-centering of AO12 ployhedron due to the nature of Bi 6s lone pair electrons, which induced lattice expansion and local distortions in the sample. The local displacements are strongly anisotropic in heterovalent-ion doped system. It is believed that random local fields exist in these compositions owing to the eixstence of charge distribution. Such heterovalent doping of Bi3+ and Zr4+ could destory simutiously the orthorhombic symmetry and the short-range ferroelecctric order, leading to the formation of complex nanodomains and local structral hetergenenity. Heterovalent doping may, therefore, offer a new avenve to design novel K0.5Na0.5NbO3 (KNN) -based materials for their mutifunctional applications.

Defect-mediated Domain-Wall Motion and Enhanced Electric-Field-induced Strain in Hot-Pressed K0.5Na0.5NbO3 Lead-Free Piezoelectric Ceramics

Morphotropic Phase Boundary, Polymorphic Phases and Enhanced Electrostrain/piezoelectricity in Ag1-xKxNbO3 Solid-Solution Ceramics

Ultrahigh electro-strain in acceptor-doped KNN lead-free piezoelectric ceramics via defect engineering

High Temperature-Insensitive Electrostrain Obtained in (K, Na)NbO3-Based Lead-Free Piezoceramics

Enhanced electric-field-induced strains in (K,Na)NbO3 piezoelectrics from heterogeneous structures

Exceptional Electrostrain with Minimal Hysteresis and Superior Temperature Stability under Low Electric Field in KNN-based Lead-Free Piezoceramics

High normalized strain obtained in li-modified (K,Na)NbO3 lead-free piezoceramics

High Normalized Strain Obtained in Li-Modified (K,Na)NbO<sub>3</sub>Lead-Free Piezoceramics

Enhanced Field‐Induced Strain in the Textured Lead‐Free Ceramic

Ultrahigh field-induced strain in lead-free ceramics

Defect-driven conductivity behavior in lead-free KNN-based ceramics

High Electrostrictive Strain Induced by Defect Dipoles in Acceptor-Doped (K0.5na0.5)nbo3ceramics

The Evolution Mechanism of Defect Dipoles and High Strain in MnO2-doped KNN Lead-Free Ceramics

The structural origin of enhanced piezoelectric performance and stability in lead free ceramics

Enhanced temperature stability of electric-field-induced strain in KNN-based ceramics

One simple approach, two remarkable enhancements: Manipulating defect dipoles and local stress of (K, Na)NbO3-based ceramics

Nanodomains in KNN‐Based Lead‐Free Piezoelectric Ceramics: Origin of Strong Piezoelectric Properties

Large electrical strain in lead-free K0.5Na0.5NbO3-based ceramics by heterovalent doping

Simultaneously Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics Via Defect Design

Defect Dipole‐Induced Fatigue Strain Recoverability in Lead‐Free Piezoelectric Ceramics

Practical high strain with superior temperature stability in lead-free piezoceramics through domain engineering