Abstract:In aerospace and automobile applications, the ZE41-based nanocomposites have the potential to substitute aluminum alloys in non-structural components, such as framework of aircraft wings and cabin seats, clutches and transmission housing, and piston cylinder heads, which are exposed to moderately high temperatures and wear. Therefore, this present research comprehensively investigates the mechanical properties, tribological, and influence of multi-wall carbon nanotube (MWCNT) reinforcements on rare earth element present ZE41 magnesium alloy nanocomposites. The novel ZE41/MWCNT nanocomposites with varying concentration (0–1.2 wt.%) of MWCNT were synthesized using modified ultrasonication-assisted stir squeeze casting. The synergetic effect of ultrasonication, mechanical stirring and squeezing has resulted in a significant enhancement of ultimate tensile strength (191 MPa, ↑59%) and microhardness (↑24%) for the ZE41–0.8 wt.% MWCNT nanocomposite with least porosity, and their microstructural investigations were conducted using an optical microscope, scanning electron microscope (SEM) with energy-dispersive spectroscopy (EDS), transmission electron microscope (TEM) and X-ray diffraction (XRD). The influence of varying loads, sliding frequencies, and elevated temperatures on synthesized nanocomposites by linear reciprocating dry sliding wear was studied. The ZE41–0.8 wt.% MWCNT nanocomposite showed improved wear resistance, with a 29% decrease in wear rate and a 17% reduction in the coefficient of friction. The superior wear resistance and mechanical properties of the nanocomposites were attributed to various factors, including Orowan strengthening, increased dislocation densities, grain refinement by MWCNT pinning, reinforcing action, self-lubricating tendency, load-bearing effect, hardness of nanocomposites, and the formation of a passive MgO layer at elevated temperatures.

Elevated Temperature Tribological Analysis and Mechanical Behavior of Ultrasonication-Assisted Stir-Squeeze-Casted ZE41–MWCNT Magnesium Nanocomposites

Effect of Multi-Walled Carbon Nanotubes and Carbon Fiber Reinforcements on the Mechanical and Tribological Behavior of Hybrid Mg-AZ91D Nanocomposites

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Enhanced mechanical and tribological properties of ultrasonically assisted stir-cast AA7075 metal matrix composites in challenging corrosive environments

Effect of Graphene Nanoplatelet Content on Mechanical and Elevated-Temperature Tribological Performance of Self-Lubricating ZE10 Magnesium Alloy Nanocomposites

Mechanical and Tribological Behavior of Mg-Matrix Composites Manufactured by Stir Casting

Improvement of mechanical performance on zirconium dioxide nanoparticle synthesized magnesium alloy nano composite

Development and characterization of multiwalled carbon nanotube-reinforced microwave sintered hybrid aluminum metal matrix composites: An experimental investigation on mechanical and tribological performances

Influence of Silica rich HNT/MoS2 Hybrid Reinforcements on Mechanical, Wear and Corrosion Characteristics of Magnesium AZ31 alloy

Effect of WS2 Nanotubes on the Mechanical and Wear Behaviors of AZ31 Stir Casted Magnesium Metal Matrix Composites

Synthesis and Experimental Investigations of Tribological and Corrosion Performance of AZ61 Magnesium Alloy Hybrid Composites

Evaluation of mechanical and erosive wear properties of hybrid nano composites basalt/E-glass fiber + MWCNTs/SiO 2

Fabrication and Characterization of Magnesium-Based WE43/TiC Nanocomposite Material Developed via Friction Stir Processing and Study of Significant Parameters

A comprehensive study of Al-Cu-Mg system reinforced with nano-ZrO2 particles synthesized by powder metallurgy technique

Abrasive wear behavior of WC nanoparticle reinforced magnesium metal matrix composites

An Investigation of the Tribological and Mechanical Properties of the Hybrid Mg Nanocomposites Manufactured by Mechanical Alloy

Nano-ZnO Particles’ Effect in Improving the Mechanical Response of Mg-3Al-0.4Ce Alloy

Mechanical properties of epoxy composites filled with multi-walled carbon nanotube, Nanoaluminum particles and glass fibers at elevated temperatures

Mechanical Effects of Carbon Nanotubes-Graphene Reinforced Aluminium Matrix Composites

Synergistic effect of hybrid reinforcement on magnesium-based composites for enriching mechanical and tribological characteristics

Synthesis and characterization of magnesium-titanium carbide nanocomposites via friction stir processing: An in-depth parameter investigation