Abstract:During the operation of solid rocket motors, the behavior of condensed particles impacting the wall will have a remarkable influence on the structure and performance of the engine. Especially when the aircraft is under overload flight conditions, the condensed particles will form a local high concentration particle flow under the action of inertia force, continuously scouring the surface of the insulation layer, seriously affecting the thermal protection structure and the work safety of the engine. Therefore, it is an essential issue to master the behavior mode of the condensate particle impinging the wall and clarify its dynamic characteristics and evolutionary mechanism. In this paper, the dynamic behavior of aluminum droplets impacting on the porous surface is experimentally investigated by preparing the porous wall, the influence mechanism of the porous structure on the spreading process of aluminum droplets is clarified, and the effects of the droplet's initial parameters as well as surface environment are analyzed. Combined with the fluid of volume method, the flow process of droplets on the porous surface is simulated. With the variation of the dimensionless parameters M and N, the main behavior patterns of the droplets obtained so far are rebound, adhesion, partial rebound, partial adhesion, and porous seepage. The presence of pore structure enhances the hydrophobicity of the wall and makes the droplets more easily broken during spreading. When the droplet initial energy is certain and the wall structure conditions change, there is a strong competitive relationship between its spreading and penetration. When the droplet initial energy is increased, its spreading and penetration strengths are significantly increased. The research results can provide a reference for the erosion process of condensed-phase droplets impinging on the char layer and provide theoretical basis and data support for the design and optimization of SRMs.

Solidification process of hollow metal droplets impacting a substrate

A Numerical Analysis on the Metal Droplets Impacting and Spreading out on the Substrate

Solidification of liquid metal droplet during impact in the presence of vertical magnetic field

Effect of substrate temperature on the deformation of liquid metal droplets during spreading and solidification

A Modified Phase-Field Three-Dimensional Model for Droplet Impact with Solidification

Experimental Investigation of the Sedimentation Behavior of Metal Droplets in Liquid–liquid Systems

Role of melting and solidification in the spreading of an impacting water drop

Dynamic Behavior of Metal Droplets Impacting on Porous Surfaces

Simulation of Droplet Impact, Transforming and Solidification on Different Substrates Using ISPH Method

Studies of splat morphology and rapid solidification during thermal spraying

Study of the Process of Metal Droplets with High Surface Tension Impinging on Wall

Thermal analysis and measurements for a molten metal drop impacting on a substrate: cooling, solidification and heat transfer coefficient

Numerical study of the melting and resolidification of the substrate during the impact of a ceramic droplet in a plasma spraying process

The Impact of Thermal Contact Conductance on the Spreading and Solidification of a Droplet on a Substrate

Analytical Consideration of Liquid Droplet Impingement on Solid Surfaces

Effect of Droplet Initial Temperature on Substrate Melting and Its Re-solidification in Plasma Spray Process

Deformation and Solidification of Droplet Impact With Variable Thermal Contact Resistance

The Spreading Process of Droplet Impacting on Flat Solid Surface

A study on the solidification shapes of molten metal droplet impacting at low weber number

Computational study of the effect of spray parameters on adhesion of splat on the stainless street substrate during the impact of molten zirconia droplet