Abstract:This study investigated the effect of the rib set-out repeat and single miss stitches on the structural properties and dimensional stability of double weft knitted fabrics compared with half Milano rib. Nine variations of double weft knitted fabrics were produced, each with a different number of inactive needles at the width repeat R b . The fabrics were tested after 10 days of dry relaxation and five washings. The fabric’s structural repeat at the height R h consisted of a combination of two courses, rib and plain (variant 1), and rib set-out and single with miss (float) stitch, with stitch repeats varying at the width R b (for variants 2–10). The miss stitch was made on the technical back of the knitted fabrics, and the number of inactive needles during the production of the single and double stitches ranged from 1 to 3. The fabrics were manufactured using a 10-gauge flat bed-knitting machine from blended wool/PAN (60% wool, 40% PAN) 25×2tex×2 yarn. The results demonstrated that the width repeat of miss knit stitches R b (different numbers of knit and miss loop stitches) plays a crucial role in determining the dimensional stability and structural properties of double knitted fabrics. The number of washing cycles did not significantly impact the structural properties (around ±5%). The research results demonstrated shrinkage in the length and width directions, specifically after the first two washing cycles. The rib set-out repeat and single miss stitches affect dimensional changes in both directions: an increase in the number of inactive needles increases shrinkage in the length and decreases shrinkage in the width direction. Overall, this study highlights the importance of the number and placement of miss stitches during the design process of double weft knitted fabrics, particularly when aiming to achieve specific structural and dimensional properties.

The Impact of Miss Stitch on the Dimensional Properties and Stability of Double Weft Knitted Fabrics after Dry and Washing Relaxations

Experimental Investigation on Tensile Strength of Jacquard Knitted Fabrics

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

Evaluating the tensile stress relaxation of rib weft-knitted fabrics using viscoelastic models

The effect of fabric structure on the pilling and abrasion resistance of interlock weft-knitted fabrics

Effect of knitting structure and dyeing process on drying time, air and vapor permeability

The influence of two bar warp-knitted structure on the fabric tensile stress relaxation Part II: (locknit, satin, loop raised)

Impact of Repeated Home Laundering on the Cyclic Deformation Performance of Elastane Knitted Sportswear Fabrics

Effect of Stitches on the Permeability of Interbundle Channels in Stitched Fabrics

Yarn-level numerical simulation based on micro-CT reconstruction for the stentering process of warp-knitted three-dimensional mesh fabric

The influence of two bar warp-knitted structure on the fabric tensile stress relaxation Part I: (reverse locknit, sharkskin, queens’ cord)

Viscoelastic behavior of warp-knitted spacer fabrics in iterative compression and decompression

A study of curling in rib-knit constructions

Discussion of Warp and Weft Twist Direction Matching Effect on Cotton Fabric Texture Property

Structural Design and Performance Research of a Knitted Flexible Sensor.

Investigation of the Tensile Stress Relaxation Phenomenon in Seamed Worsted Fabrics

The Influence of Yarn and Knit Structure on Comfort Properties of Sportswear Fabric

Warp-knitted strain sensors: impact of loop parameters on sensing performance under biaxial stretching

Characterization of tensile properties of chain stitch structure fabric with negative Poisson's ratio yarn

Towards optimization of sports bra strap design: the role of stitch pattern and stitch length (SL) on the properties of seamless knitted fabrics

Quality and structural properties of gimp fancy yarns using the Design of Experiments