Abstract:Fiber strain sensors that are directly woven into smart textiles play an important role in wearable systems. These sensors require a high sensitivity to detect the subtle strain in practical applications. However, traditional fiber strain sensors with constant diameters undergo homogeneous strain distribution in the axial direction, thereby limiting the sensitivity improvement. Herein, a novel strategy of internal or external structural design is proposed to significantly improve the sensitivity of fiber strain sensors. The fibers are produced with directional increases in diameter (internal design) or polydimethylsiloxane (PDMS) microbeads attached to surfaces (external design) by combining hollow glass tubes used as templates with PDMS drops. The structural modification of the fiber significantly impacts the sensing performance. After optimizing structural parameters, the highest gauge factor reaches 123.1 in the internal–external structure design at 25% strain. A comprehensive analysis reveals that the desirable scheme is the internal structural design, which features a high sensitivity of 110 with a 100% improvement at ∼5–20% strain. Because of the sufficiently robust interface, even at the 800th cycle, fiber sensors still possessed an excellent stable performance. The morphology evolution mechanism indicates that the resistance increase is closely related with the increased peak width and distance, and the appearance of gaps. Based on the finite element modeling simulation, the quantified effective contributions of different strategies positively correlate with the improved sensitivity. The proposed fiber strain sensors, which are woven into the two-dimensional network structure, exhibit an excellent capability for displacement monitoring and facilitate the traffic control of crossroads.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13427?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13427</a>.Relationship between viscosity and temperature, as-prepared PDMS fibers, low-resolution images of the PPy wrinkle layer on the fiber surface, response time at 10% strain, performance comparison of PPy-coated and CNT-coated fibers, effect of the locations, quantities, and interval distances of the microbeads on strain distribution, strain level and effective contributions of the various designs, and morphology evolution at different cycles (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13427/suppl_file/am0c13427_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Warp-knitted strain sensors: impact of loop parameters on sensing performance under biaxial stretching

Sensing performance of textile strain sensors with different weave structures

Textile-based weft knit strain sensor: Experimental investigation of the effect of stretching on electrical conductivity and electromagnetic shielding

Evaluation of Electrical Characteristics of Weft−Knitted Strain Sensors for Joint Motion Monitoring: Focus on Plating Stitch Structure

Three-directional knitted fabric sensor made of elastic carbon-based nanofiber yarn with excellent tensile and pressure sensing performance

The effect of tensile deformation of knitted fabrics on their electromagnetic shielding ability, electrical resistance, and porosity

Structural Design and Performance Research of a Knitted Flexible Sensor.

3D network structure and sensing performance of woven fabric as promising flexible strain sensor

Sensitivity Improvement of Stretchable Strain Sensors by the Internal and External Structural Designs for Strain Redistribution

A comparative study of knitted strain sensors fabricated with conductive composite and coated yarns

An Evaluation of Multicomponent Weft-Knit Twill Structures for Sensing Tensile Force

An Evaluation of Multi-Component Weft-Knitted Twill Structures for Sensing Tensile Force

Assessing the Role of Yarn Placement in Plated Knit Strain Sensors: A Detailed Study of Their Electromechanical Properties and Applicability in Bending Cycle Monitoring

Preparation and Performance of Biaxially Stretched CNT-SBS/POE Flexible Strain Sensor with a Double Percolation Structure

Knotted Fiber-based Strain Sensors with Tunable Sensitivity and Sensing Region for Wearable Physiological Signals and Human Motion Monitoring

Effect of spatial structure and aggregation state of silk fibers in fabric on strain sensing performance and mechanism

A Scalable Durable and Seamlessly Integrated Knitted Fabric Strain Sensor for Human Motion Tracking

Preparation of a Highly Sensitive and Stretchable Strain Sensor of MXene/Silver Nanocomposite-Based Yarn and Wearable Applications

Robust Fiber Strain Sensor by Designing Coaxial Coiling Structure with Mutual Inductance Effect

Kernmantle structured stretchable strain sensors for biomechanical sensing in amphibious environments

Multifunctional Wearable Strain Sensor Made with an Elastic Interwoven Fabric for Patients with Motor Dysfunction