Abstract:Fiber strain sensors that are directly woven into smart textiles play an important role in wearable systems. These sensors require a high sensitivity to detect the subtle strain in practical applications. However, traditional fiber strain sensors with constant diameters undergo homogeneous strain distribution in the axial direction, thereby limiting the sensitivity improvement. Herein, a novel strategy of internal or external structural design is proposed to significantly improve the sensitivity of fiber strain sensors. The fibers are produced with directional increases in diameter (internal design) or polydimethylsiloxane (PDMS) microbeads attached to surfaces (external design) by combining hollow glass tubes used as templates with PDMS drops. The structural modification of the fiber significantly impacts the sensing performance. After optimizing structural parameters, the highest gauge factor reaches 123.1 in the internal–external structure design at 25% strain. A comprehensive analysis reveals that the desirable scheme is the internal structural design, which features a high sensitivity of 110 with a 100% improvement at ∼5–20% strain. Because of the sufficiently robust interface, even at the 800th cycle, fiber sensors still possessed an excellent stable performance. The morphology evolution mechanism indicates that the resistance increase is closely related with the increased peak width and distance, and the appearance of gaps. Based on the finite element modeling simulation, the quantified effective contributions of different strategies positively correlate with the improved sensitivity. The proposed fiber strain sensors, which are woven into the two-dimensional network structure, exhibit an excellent capability for displacement monitoring and facilitate the traffic control of crossroads.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13427?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13427</a>.Relationship between viscosity and temperature, as-prepared PDMS fibers, low-resolution images of the PPy wrinkle layer on the fiber surface, response time at 10% strain, performance comparison of PPy-coated and CNT-coated fibers, effect of the locations, quantities, and interval distances of the microbeads on strain distribution, strain level and effective contributions of the various designs, and morphology evolution at different cycles (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13427/suppl_file/am0c13427_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Sensitivity Improvement of Stretchable Strain Sensors by the Internal and External Structural Designs for Strain Redistribution

Surface Strain Redistribution on Structured Microfibers to Enhance Sensitivity of Fiber-Shaped Stretchable Strain Sensors.

In-situ Forming Ultra-Mechanically Sensitive Materials for High-Sensitivity Stretchable Fiber Strain Sensors.

Design of Helically Double-Leveled Gaps for Stretchable Fiber Strain Sensor with Ultralow Detection Limit, Broad Sensing Range, and High Repeatability.

3D Printing of Stretchable Strain Sensor Based on Continuous Fiber Reinforced Auxetic Structure

Interfacial modification strategy for the fabrication of high performance fiber-based strain sensors

A Highly Sensitive and Stretchable Yarn Strain Sensor for Human Motion Tracking Utilizing a Wrinkle-Assisted Crack Structure.

Highly Conductive PVA/Ag Coating by Aqueous in Situ Reduction and Its Stretchable Structure for Strain Sensor.

Effect of spatial structure and aggregation state of silk fibers in fabric on strain sensing performance and mechanism

Hollow-porous fiber-shaped strain sensor with multiple wrinkle-crack microstructure for strain visualization and wind monitoring

Highly Stretchable, Sensitive and Wide Linear Responsive Fabric-Based Strain Sensors with a Self-Segregated Carbon Nanotube (cnt)/polydimethylsiloxane (PDMS) Coating

1D-2D nanohybrid-based textile strain sensor to boost multiscale deformative motion sensing performance

Fabrication of electrically conductive poly(styrene-b-ethylene-ran-butylene-b-styrene)/multi-walled carbon nanotubes composite fiber and its application in ultra-stretchable strain sensor

Strain-insensitive Fiber Sensors Bioinspired by Spider Silk with a Multilevel Helical Structure

Superior Piezoresistive Strain Sensing Behaviors of Carbon Nanotubes in One-Dimensional Polymer Fiber Structure

A Highly Stretchable and Ultra-Sensitive Strain Sensing Fiber Based on a Porous Core-Network Sheath Configuration for Wearable Human Motion Detection

Preparation and Performance of Biaxially Stretched CNT-SBS/POE Flexible Strain Sensor with a Double Percolation Structure

Flexible strain sensors with high sensitivity and large monitoring range prepared by biaxially stretching conductive polymer composites with a bilayer structure

Hierarchical structural design towards stretchable strain sensors with ultra-high sensitivity and linearity

Highly Sensitive Flexible Strain Sensor Based on a Double-percolation Structured Elastic Fiber of Carbon Nanotube (CNT)/Styrene Butadiene Styrene (SBS) @ Thermoplastic Polyurethane (TPU) for Human Motion and Tactile Recognition

3D Printed MXene‐Based Wire Strain Sensors with Enhanced Sensitivity and Anisotropy