Abstract:The stress relaxation experiments were performed at room temperature with different initial strain using a self‐constructed stress relaxation device, and the stress relaxation mechanism was analyzed and a viscoelastic model curve was calculated and fitted. The main purpose of this study is to analyze the fundamental deformation and relaxation mechanisms responsible for the stress relaxation behavior of a novel wide‐angle fabric/ethylene propylene diene monomer (EPDM) composite (W‐60 composite) at room temperature with different initial strain. The designed and constructed stress relaxation test device can test five samples simultaneously. The stress relaxation curves of the W‐60 composite are in general agreement with those of the pure rubber. It is proved again that the wide‐angle fabric has good formability. Through the slope calculation, the stress relaxation curves of the W‐60 composite can be divided into two stages: rapid relaxation stage (RRS) and slow relaxation stage (SRS). The cross‐sections are observed using photographic tracking techniques and CT scans. The stress relaxation mechanism of the W‐60 composite is dominated by the internal physical relaxation. It shows many more correlations under the experiment results for the three‐component Maxwell's model with parallel‐connect nonlinear spring (NS‐TCM model). However, in the mechanical models with more parameters, the computational problem also increases due to the accumulation of local minima, which makes it harder to find global minima. Highlights This study builds stress relaxation testing equipment for flexible composite. This study uses a 7‐day stress relaxation pre‐experiment. The stress retrogradation and elastic recovery have occurred. The deformation and strengthening mechanisms of stress relaxation are revealed. The NS‐TCM model shows a positive correlation with the experimental results.

The influence of two bar warp-knitted structure on the fabric tensile stress relaxation Part II: (locknit, satin, loop raised)

The influence of two bar warp-knitted structure on the fabric tensile stress relaxation Part I: (reverse locknit, sharkskin, queens’ cord)

Evaluating the tensile stress relaxation of rib weft-knitted fabrics using viscoelastic models

Investigation of the Tensile Stress Relaxation Phenomenon in Seamed Worsted Fabrics

The effect of interlining's structure on the stress relaxation of laminated fabrics in terms of loading direction

Viscoelastic behavior of warp-knitted spacer fabrics in iterative compression and decompression

Detailed Deformation Behaviors and Tensile Parameters for Coated Warp-Knitted Fabrics in 2D Stress Space

Warp-knitted strain sensors: impact of loop parameters on sensing performance under biaxial stretching

The effect of fabric structure on the pilling and abrasion resistance of interlock weft-knitted fabrics

Effect of knitting structure and dyeing process on drying time, air and vapor permeability

Investigation of the mechanical and forming behaviour of 3D warp interlock carbon woven fabrics for complex shape of composite material

Tensile Properties of Reinforced Multi-Axial Warp Knitted Fabrics

Tensile stress relaxation behavior of a novel wide‐angle fabric/EPDM composite at room temperature

The evolving unity of structural mechanics in stretch-dominant textile architectures

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Investigation of forming process and deformation mechanisms of 3D warp interlock fabric

Yarn-level numerical simulation based on micro-CT reconstruction for the stentering process of warp-knitted three-dimensional mesh fabric

Enhancing Force Absorption, Stress–Strain and Thermal Properties of Weft-Knitted Inlay Spacer Fabric Structures for Apparel Applications

Experimental Analysis of the Relationship between Textile Structure, Tensile Strength and Comfort in 3D Printed Structured Fabrics

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM