Influence of chemical and magnetic interface properties of Co-Fe-B / MgO / Co-Fe-B tunnel junctions on the annealing temperature dependence of the magnetoresistance

J. Schmalhorst,A. Thomas,G. Reiss,X. Kou,E. Arenholz
DOI: https://doi.org/10.1063/1.2776001
2007-01-30
Abstract:The knowledge of chemical and magnetic conditions at the Co40Fe40B20 / MgO interface is important to interpret the strong annealing temperature dependence of tunnel magnetoresistance of Co-Fe-B / MgO / Co-Fe-B magnetic tunnel junctions, which increases with annealing temperature from 20% after annealing at 200C up to a maximum value of 112% after annealing at 350C. While the well defined nearest neighbor ordering indicating crystallinity of the MgO barrier does not change by the annealing, a small amount of interfacial Fe-O at the lower Co-Fe-B / MgO interface is found in the as grown samples, which is completely reduced after annealing at 275C. This is accompanied by a simultaneous increase of the Fe magnetic moment and the tunnel magnetoresistance. However, the TMR of the MgO based junctions increases further for higher annealing temperature which can not be caused by Fe-O reduction. The occurrence of an x-ray absorption near-edge structure above the Fe and Co L-edges after annealing at 350C indicates the recrystallization of the Co-Fe-B electrode. This is prerequisite for coherent tunneling and has been suggested to be responsible for the further increase of the TMR above 275C. Simultaneously, the B concentration in the Co-Fe-B decreases with increasing annealing temperature, at least some of the B diffuses towards or into the MgO barrier and forms a B2O3 oxide.
Materials Science
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to understand the mechanism of the change in magnetoresistance (TMR) of Co - Fe - B/MgO/Co - Fe - B magnetic tunnel junctions (MTJs) at different annealing temperatures. Specifically, the researchers are concerned with how the chemical and magnetic interface properties affect the influence of annealing temperature on TMR. The paper mentions that as the annealing temperature increases from 200°C to 350°C, TMR increases from 20% to 112%. Through X - ray absorption spectroscopy (XAS) and X - ray magnetic circular dichroism (XMCD) techniques, the researchers explored the chemical and magnetic changes at the Co - Fe - B/MgO interface during the annealing process, especially the reduction process of Fe - O and the recrystallization phenomenon of the Co - Fe - B electrode, and these changes are closely related to the significant increase in TMR. In addition, the paper also discusses the behavior of boron (B) and its oxides during the annealing process and their possible influence on TMR performance.