Abstract:The goal of this paper is to investigate the aerodynamic and aerothermodynamic behavior of the Schiaparelli capsule after the deployment of a supersonic disk-gap-band (DGB) parachute during its re-entry phase into the Martian atmosphere. The novelty of this work lies in the investigation by LES (large-eddy simulations) of the coupled interaction of the flow field generated behind the capsule and that in front of the flexible DGB parachute. These simulations are performed at an altitude of 10 km and a Mach number around 2, i.e., a regime in which large canopy-area oscillations are observed. LES results have shown a strong interaction between the bow shock, the recompression and expansion waves, high pressure, density and temperature gradients, heat flux towards the airstream and the body implying turbulence generation, ingestion, and amplification through the shock waves. Vortices released from the capsule at a frequency of about 52 Hz and 159 Hz, corresponding to Strouhal numbers of ~0.2 and 0.75, respectively, are the main factors responsible for the instabilities of the hypersonic re-entry capsule and the disk-gap-band parachute coupled system. The nonlinear turbulence flow field generated at the capsule back is amplified when passing the parachute bow shock, and this is responsible for the non-axisymmetric behavior around and behind the parachute that caused the uncontrolled capsule oscillations and the Schiaparelli mission failure. In fact, an LES of the parachute without the capsule, for the same conditions, show a completely axisymmetric field, varying in time, but axisymmetric. In order to avoid this turbulence amplification, dampening of the vortex shedding is critical. Different techniques have been already proposed for other applications. In the case of capsule re-entry, due to the high temperatures in front of the capsule behind the bow shock since air plasma is generated, damping of the vortex shedding could be achieved by means of magnetohydrodynamic (MHD) control.

A New Method of Atmospheric Reentry for Space Ships

Ablation Analysis and Engineering Calculation on Carbon-based Material of Reentry Vehicles

Aero Heating Optimization of a Hypersonic Thermochemical Non-Equilibrium Flow around Blunt Body by Application of Opposing Jet and Blunt Spike

Hypervelocity Heat Protection- A Review of Laboratory Experiments

Modeling and Simulation of Radiation from Electronic Transitions in Hypersonic Atmospheric Reentry Flow

Low Density Syntactic Foam Composites as Ablative TPS Material for High Heat Flux Conditions for Reentry Missions

Sustainable space technologies—Strategies toward a predictive aerothermal design of re-useable space transportation systems

Large-Eddy Simulations of a Hypersonic Re-Entry Capsule Coupled with the Supersonic Disk-Gap-Band Parachute

Aerothermodynamics Environments of Orbital Return Vehicle

New Trends in Inflatable Re-Entry Aeroshell

Passenger life-saving in a badly damaged aircraft scenario

A Thought of Wrapping Space Shuttle External Tank with Ceramic Fiber Fishnet Stockings

Study on the Ablation Resistance of Carbon-Based Composites in Reentry Simulation Environments

Development of Elements of Reusable Heat Shields from a Carbon–Ceramic Composite Material 1. Theoretical Forecast

Aerothermodynamic Analysis of Faceted Aeroshell at Hypersonic Speed

Ablation of carbon-carbon composite during re-entry

Carbon ablators with porosity designed for enhanced aerospace thermal protection

Evaluation and design methods for high‐efficiency charring composite under complex coupling mechanisms in both material and boundary layer

Mission design for point-to-point passenger transport with reusable launch vehicles

New AB-Thermonuclear Reactor for Aerospace

Inflatable Aerodynamic Decelerators for CubeSat Reentry and Recovery: Surface Properties