Abstract:A feasibility study of a subcritical fission-fusion hybrid reactor using lead-lithium eutectic as a coolant and minor actinides (MAs) as fuel is presented. Such a reactor could support the fission community by transmuting MAs and the fusion community by breeding tritium. The feasibility of such a reactor for the burnup of MAs is assessed in terms of burnup performance, tritium breeding, and safety characteristics. Tandem mirrors are a promising neutron source technology, and a deuterium-tritium tandem mirror is considered here for the neutron source with power Psource = 1.13 MW assumed for scoping purposes. Subcritical reactivities from k eff = 0.9800 to k eff = 0.9950 were considered, representing the initial reference for subcritical reactivity and the assessed upper limit, respectively. Stability analyses indicated the reactivity would be stable under perturbations of fuel, coolant, and inlet temperatures, with a positive reactivity insertion expected during reactor shutdown. This keff range corresponded to nuclear heating values of 150 to 650 MW and mass burn rates of 53 to 216 kg/year. The upper mass burn rate limit would require 1110 reactor years with a capacity factor of 0.9 to fission the global supply of MAs and could offset the annual U.S. MA production with eight reactors. Tritium breeding was assessed for k eff = 0.9800 and 3.795% 6 Li enrichment in the coolant, and a tritium breeding ratio of 1.602 ± 0.017 was tallied, suggesting the reactor could, without elevated 6 Li enrichment, produce tritium to both sustain operation and supply tritium for other fusion devices. Time-series modeling of fuel burnup was conducted for a four-batch loading scheme and three different fuel residence times at k eff = 0.9800, which showed system performance would drop with burnup, and that the rate of this drop was lower for longer fuel residence times, motivating a means of reactivity control. Last, changes in fuel composition with burnup were assessed for relative concentrations of MAs, transmutation products, and fission products. The breeding of plutonium in the blanket was calculated and found to be of minimal proliferation concern.

New AB-Thermonuclear Reactor for Aerospace

Micro -Thermonuclear AB-Reactors for Aerospace

Thermonuclear Reflect AB-Reactor

The ARIES-I Tokamak Reactor Study<sup>†</sup>

Simplest AB-Thermonuclear Space Propulsion and Electric Generator

ARIES-I SiC Composite Low Activation Blanket Design

The Princeton Field-Reversed Configuration for Compact Nuclear Fusion Power Plants

The WARP Reactor Concept

A miniature integrated nuclear reactor design with gravity independent autonomous circulation

Nuclear Thermo-Electric Thruster

The challenges of gas-cooled reactor technology for space propulsion and the development of the JANUS space reactor concept

ARC: A compact, high-field, fusion nuclear science facility and demonstration power plant with demountable magnets

Scoping Studies for a Lead-Lithium-Cooled, Minor-Actinide-Burning, Fission-Fusion Hybrid Reactor Design

Study on Reactivity Control Strategies for the Thermoelectric Integrated Space Nuclear Reactor

Advancing Methods for Fusion Neutronics: An Overview of Workflows and Nuclear Analysis Activities at UKAEA

AB Space Engine

Direct Drive Laser Fusion Facility and Pilot Plant

Design and Evaluation of Nuclear System for ARIES-ACT2 Power Plant with DCLL Blanket

Neutronic Design Study of an Integrated Space Nuclear Reactor with Stirling Engine

Cathode-less RF plasma thruster design and optimisation for an atmosphere-breathing electric propulsion (ABEP) system

3D high-fidelity automated neutronics guided optimization of fusion blanket designs