Abstract:Due to the advantages of high thrust and high specific impulse, nuclear thermal propulsion (NTP) is a preferred near-term rocket engine technology for future Mars missions. This article introduces the reactor design based on spherical cermet fuel element, with the aim of studying the feasibility of applying this new fuel in NTP system. First, design requirements are determined based on the unique features of NTP. In terms of neutronics, the effect of rocket launch accidents and fuel loss caused by high-temperature hydrogen are considered. Thermal hydraulics refer to the requirements of NASA's Mars Design Reference Architecture 5.0 (DRA 5.0) for impulse, thrust, and thrust to weight ratio. Second, based on the requirements above, the optimal reactor configuration parameters are obtained with the goal of maximizing the thrust to weight ratio: reactor radius 51.1 cm, height 106 cm, aspect ratio 1.04, reflector 13 cm, and reactor mass 3940 kg. Finally, the performances of the optimal reactor design are analyzed. The neutron spectrum shows a characteristic of fast neutron spectrum, and fuel loss analysis shows that the core can withstand a fuel mass loss of about 4 wt%. In addition, the core axial and radial power distribution are calculated, with an overall power peak factor of 1.26. The thermal hydraulic calculation provides a range of core operating conditions that satisfy the design requirements of DRA 5.0 and temperature, with power of 620 ∼ 950 MW and flow rate of 16 ∼ 24 kg/s. Compared with the ANL200/2000 reactor using prismatic cermet, it has the advantage of higher specific impulse. The main disadvantage is the large pressure drop, which prevents it from being applied to the scenarios of high power and high thrust. Therefore, for NTP reactor using spherical cermet elements, it should be applied to low to medium power scenarios.

The challenges of gas-cooled reactor technology for space propulsion and the development of the JANUS space reactor concept

Advanced nuclear power engine: A brief overview of gas core reactor for space exploration

Gas Core Reactors for Deep Space Propulsion

DESIGN OF A TRISO PARTICLE FUEL BASED INTEGRATED GAS-COOLED SPACE NUCLEAR REACTOR

Design of a Hundred-Kilowatt Level Integrated Gas-Cooled Space Nuclear Reactor for Deep Space Application

Preliminary Design and Neutronic Analysis of Prismatic High Temperature Gas-cooled Space Nuclear Reactor

Design of a Fast Molten Salt Reactor for Space Nuclear Electric Propulsion

A review of nuclear electric fission space reactor technologies for achieving high-power output and operating with HALEU fuel

Neutronics and Thermal Hydraulics Analysis of a Conceptual Ultra-High Temperature MHD Cermet Fuel Core for Nuclear Electric Propulsion

The ARIES-I Tokamak Reactor Study<sup>†</sup>

Space Nuclear Power and Propulsion at USNC-Tech

Conceptual Design for a 5 Kwe Space Nuclear Reactor Power System

Multiphysics and multi-scale design and analysis of nuclear thermal propulsion pellet bed reactor based on spherical cermet fuel element

A high power ion thruster for deep space missions

Dynamic simulation of a space gas-cooled reactor power system with a closed Brayton cycle

Efficiency and Mass Optimization for Space Nuclear Power Systems with Closed Brayton Cycle Loops

Design study of gas-cooled fast reactor with natural uranium as fuel employing modified CANDLE shuffling strategy in the axial direction

Physics Evaluation of Alternative Uranium-Based Oxy-Carbide Annular Fuel Concepts for Potential Use in Compact High-Temperature Gas-Cooled Reactors

Thermal‐hydraulic analysis of an open‐grid megawatt gas‐cooled space nuclear reactor core

Thermal‐hydraulic analysis of gas‐cooled space nuclear reactor power system with closed Brayton cycle

Optimization of thermodynamic performance and mass evaluation for MW-class space nuclear reactor coupled with noble gas binary mixtures Brayton cycle