Large-Eddy Simulations of a Hypersonic Re-Entry Capsule Coupled with the Supersonic Disk-Gap-Band Parachute

Lakshmi Narayana Phaneendra Peri,Antonella Ingenito,Paolo Teofilatto
DOI: https://doi.org/10.3390/aerospace11010094
IF: 2.66
2024-01-20
Aerospace
Abstract:The goal of this paper is to investigate the aerodynamic and aerothermodynamic behavior of the Schiaparelli capsule after the deployment of a supersonic disk-gap-band (DGB) parachute during its re-entry phase into the Martian atmosphere. The novelty of this work lies in the investigation by LES (large-eddy simulations) of the coupled interaction of the flow field generated behind the capsule and that in front of the flexible DGB parachute. These simulations are performed at an altitude of 10 km and a Mach number around 2, i.e., a regime in which large canopy-area oscillations are observed. LES results have shown a strong interaction between the bow shock, the recompression and expansion waves, high pressure, density and temperature gradients, heat flux towards the airstream and the body implying turbulence generation, ingestion, and amplification through the shock waves. Vortices released from the capsule at a frequency of about 52 Hz and 159 Hz, corresponding to Strouhal numbers of ~0.2 and 0.75, respectively, are the main factors responsible for the instabilities of the hypersonic re-entry capsule and the disk-gap-band parachute coupled system. The nonlinear turbulence flow field generated at the capsule back is amplified when passing the parachute bow shock, and this is responsible for the non-axisymmetric behavior around and behind the parachute that caused the uncontrolled capsule oscillations and the Schiaparelli mission failure. In fact, an LES of the parachute without the capsule, for the same conditions, show a completely axisymmetric field, varying in time, but axisymmetric. In order to avoid this turbulence amplification, dampening of the vortex shedding is critical. Different techniques have been already proposed for other applications. In the case of capsule re-entry, due to the high temperatures in front of the capsule behind the bow shock since air plasma is generated, damping of the vortex shedding could be achieved by means of magnetohydrodynamic (MHD) control.
engineering, aerospace
What problem does this paper attempt to address?
The paper primarily explores the fluid dynamics and thermal fluid dynamics behavior between the Disk-Gap-Band (DGB) supersonic parachute and the Schiaparelli probe during its re-entry phase into the Martian atmosphere. Specifically, the study analyzes the complex interactions between the DGB parachute and the probe after the parachute is deployed, using the Large-Eddy Simulations (LES) method. Key findings in the paper include: - A strong bow shock forms behind the probe, and a similar shock forms in front of the parachute. - The interaction between the shock waves, recompression waves, expansion waves, and high-pressure, density, and temperature gradients leads to the generation, ingestion, and amplification of turbulence. - The vortex shedding frequency behind the probe is approximately 52 Hz and 159 Hz, which are the main factors causing system instability. - The nonlinear turbulent field generated behind the probe is amplified when passing through the bow shock in front of the parachute, leading to non-axisymmetric behavior around the parachute and ultimately causing uncontrolled probe oscillations, which is one of the reasons for the failure of the Schiaparelli mission. - To reduce such oscillations, vortex shedding needs to be suppressed. One possible method to achieve this is through Magnetohydrodynamic (MHD) control. Overall, this paper aims to understand and address the technical challenges encountered by the Schiaparelli probe during its Mars landing, particularly the fluid dynamics issues related to the supersonic parachute. Through these studies, theoretical support and technical guidance can be provided for designing more stable and reliable parachute systems for future Mars exploration missions.