Abstract:Decreasing Li/Ni disorder has been a challenging problem for layered oxide materials, where disorder seriously restricts their electrochemical performances for lithium-ion batteries (LIBs). Element doping is a great strategy that has been widely used to stabilize the structure of the cathode material of an LIB and improve its electrochemical performance. On the basis of the results of previous studies, we hypothesized that the element of Ca, which has a lower valence state and larger radius compared to Ni2+, would be an ideal doping element to decrease the Li/Ni disorder of LiMO2 materials and enhance their electrochemical performances. A Ni-rich LiNi0.8Mn0.1Co0.1O2 cathode material was selected as the bare material, which usually shows severe Li/Ni disorder and serious capacity attenuation at a high cutoff voltage. So, a series of Ca-doped LiNi0.8(1-x)Co0.1Mn0.1Ca0.8xO2 (x = 0-8%) samples were synthesized by a traditional solid-state method. As hypothesized, neutron diffraction showed that Ca-doped LiNi0.8Co0.1Mn0.1O2 possessed a lower degree of Li/Ni disorder, and potentiostatic intermittent titration results showed a faster diffusion coefficient of Li+ compared with that of LiNi0.8Mn0.1Co0.1O2. The Ca-doped LiNi0.8Mn0.1Co0.1O2 samples exhibited higher discharge capacities and better cycle stabilities and rate capabilities, especially under a high cutoff voltage with 4.5 V. In addition, the problems of polarization and voltage reduction of LiNi0.8Mn0.1Co0.1O2 were also alleviated by doping with Ca. More importantly, we infer that it is crucial to choose an appropriate doping element and our findings will help in the research of other layered oxide materials.

Enhanced Thermal Stability of Aerosol-Synthesized Ni-Rich Li-Ion Battery Cathode Materials via Concentration-Gradient Ca Doping

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Design of Nb5+-doped high-nickel layered ternary cathode material and its structure stability

Decreasing Li/Ni Disorder and Improving the Electrochemical Performances of Ni-Rich LiNi0.8Co0.1Mn0.1O2 by Ca Doping.

Enhancement of Structural, Electrochemical, and Thermal Properties of High-Energy Density Ni-Rich LiNi0.85Co0.1Mn0.05O2 Cathode Materials for Li-Ion Batteries by Niobium Doping

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Regulating the Charge Distribution of Oxygen by High-Entropy Doping to Stabilize Single-Crystal Ni-Rich Cathode Materials

In situ synthesis of a nickel concentration gradient structure of Ni-rich LiNi0.8Co0.15Al0.05O2 with promising superior electrochemical properties at high cut-off voltage

One-Step Synthesis of a Single-Crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 Cathode with Excellent Electrochemical Properties by Ti 4+ Doping and LiTi 2 O 4 In Situ Chemical Coating Using a Novel Variable Temperature Sintering Process

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

An In-Depth Understanding of the Effect of Aluminum Doping in High-Nickel Cathodes for Lithium-Ion Batteries

In Situsynthesis Of A Nickel Concentration Gradient Structure Of Ni-Rich Lini(0.8)Co(0.15)Al(0.05)O(2)With Promising Superior Electrochemical Properties At High Cut-Off Voltage

Stabilization of NCM811 cathode for Li-ion batteries by N-doped carbon coating

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Alkali metal Na+ doped LiNi0.8Co0.1Mn0.1O2 cathode material with a stable structure and high performance for lithium-ion batteries

Improving the Electrochemical Performances and Structural Stability of Ultrahigh-Ni Cathodes by Using Multi-Element Co-Doping Methods

Enhancing the Storage Performance and Thermal Stability of Ni-Rich Layered Cathodes by Introducing Li2MnO3

Enhancing Electrochemical Performance of Sodium-Ion Batteries: Optimal Ca2+ Doping in O3-NaNi0.33Mn0.33Fe0.33O2 Layered Oxide Cathode Materials