Abstract:The poor rate performance and low discharge capacity of LiCoO2 limit its applications. Therefore, in this work, we synthesized Li1-xMxCoO2 (M = Na, Zr, Nb) via solid-phase synthesis to improve its properties. X-ray diffraction (XRD) results suggest that the doping elements were successfully doped into LiCoO2. The electrochemical properties showed that the samples doped with the high-valence elements Zr and Nb had a higher capacity, better cycle stability, and better rate performance than those doped with the low-valence element Na. In particular, the capacity retention of LiCoO2, Li0.97Na0.03CoO2, Li0.99Zr0.01CoO2, and Li0.99Nb0.01CoO2 was 68, 42, 85, and 87%, respectively, after 80cycles at a rate of 10 C at 55 degrees C. However, doping of Zr and Nb into the Li+ site of LiCoO2 will reduce the content of Li+. And, less Li+ extracted in the cathode material resulting in low discharge capacity under low current density. The larger radius of Na+ is incorporated into the Li slab and enlarged the interlayer spacing of the (003) plane. The larger (003) interplanar spacing can significantly facilitate the lithium diffusion and is also favorable to the rate capability. The differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis results demonstrated that the Zr-doped and Nb-doped LiCoO2 had a higher thermal stability in the charged state than the Na-doped LiCoO2. Additionally, the resistances of the Zr-doped and Nb-doped electrodes were much lower than that of the undoped electrode. Our research results indicate that doping with high-valence elements is a very effective strategy for optimizing the electrochemical performance of LiCoO2 and that this method can also be extended to other cathode materials.

Highly improved electrochemical performances of LiCoO 2 via a multi-element co-doping strategy

Elucidation of Synergistic Effect of Mg-co-doping on Electrochemical Performance of Mn-doped LiNiO2

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Synthesis of co-doped high voltage lithium cobalt oxide with high rate electrochemical performance

Simultaneous Near‐Surface Trace Doping and Surface Modifications by Gas–Solid Reactions during One‐Pot Synthesis Enable Stable High‐Voltage Performance of LiCoO2

Improving the Cycling Performance, Rate Capacity, and Thermal Stability of LiCoO2 by Doping High-Valence Ions into the Li+ Site

High-voltage Performance of LiCoO2 Cathode Studied by Single Particle Microelectrodes –influence of Surface Modification with TiO2

Interplay between multiple doping elements in high-voltage LiCoO<sub>2</sub>

Improving the Electrochemical Behavior of LiCoO2 Electrode by Mixed Zr–Mg Doping

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Mitigating Lattice Distortion of High-Voltage LiCoO2 via Core-Shell Structure Induced by Cationic Heterogeneous Co-Doping for Lithium-Ion Batteries

Interplay between multiple doping elements in high-voltage LiCoO 2

Synergetic effect of Ti-Mg-Sb tri-doping on enhanced electrochemical performance of LiCoO 2 at 4.6 V

One‐Step Sintering Synthesis Achieving Multiple Structure Modulations for High‐Voltage LiCoO2

Co/Li-dual-site doping towards LiCoO 2 as a high-voltage, fast-charging, and long-cycling cathode material

From Metal to Cathode Material: in situ Formation of LiCoO2 with Enhanced Cycling Performance and Suppressed Phase Transition

The Synergetic Effects of Ru and Al Co‐Doping for Improved Cyclability of LiCoO2 at High Voltages

Tuning Co/O Redox Chemistry via Fermi Level Regulation for Stable High-Voltage LiCoO 2

Enhanced electrochemical performance and storage mechanism of LiFePO4 doped by Co, Mn and S elements for lithium-ion batteries

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

High-entropy doping for high-voltage LiCoO 2 with enhanced electrochemical performances