Abstract:A progressively reinforced cathode/electrolyte interphase (CEI) is realized via constructing Zr─O deposits (ZrO2 and Li2ZrO3) on Z‐LCO, i.e. the fluorination of Zr─O and densification of CEI layer driven by the chemical reaction between ZrOxFy and LiF, greatly reinforcing the toughness of CEI containing inorganic species. Consequently, Z‐LCO achieve an enhanced and reversible O3/H1‐3 phase transition and excellent electrochemical performance at 4.6/4.65 V. For LiCoO2 (LCO) operated beyond 4.55 V (vs Li/Li+), it usually suffers from severe surface degradation. Constructing a robust cathode/electrolyte interphase (CEI) is effective to alleviate the above issues, however, the correlated mechanisms still remain vague. Herein, a progressively reinforced CEI is realized via constructing Zr─O deposits (ZrO2 and Li2ZrO3) on LCO surface (i.e., Z‐LCO). Upon cycle, these Zr─O deposits can promote the decomposition of LiPF6, and progressively convert to the highly dispersed Zr─O─F species. In particular, the chemical reaction between LiF and Zr─O─F species further leads to the densification of CEI, which greatly reinforces its toughness and conductivity. Combining the robust CEI and thin surface rock‐salt layer of Z‐LCO, several benefits are achieved, including stabilizing the surface lattice oxygen, facilitating the interface Li+ transport kinetics, and enhancing the reversibility of O3/H1‐3 phase transition, etc. As a result, the Z‐LCO||Li cells exhibit a high capacity retention of 84.2% after 1000 cycles in 3–4.65 V, 80.9% after 1500 cycles in 3–4.6 V, and a high rate capacity of 160 mAh g−1 at 16 C (1 C = 200 mA g−1). This work provides a new insight for developing advanced LCO cathodes.

Tuning Co/O Redox Chemistry via Fermi Level Regulation for Stable High-Voltage LiCoO 2

Suppressing Surface Ligand-to-Metal Charge Transfer Toward Stable High-Voltage LiCoO2.

Reducing Co/O Band Overlap Through Spin State Modulation for Stabilized High Capability of 4.6 V LiCoO2.

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Hierarchical Doping Engineering with Active/Inert Dual Elements Stabilizes LiCoO2 to 4.6 V

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Highly stable operation of LiCoO2 at cut-off ≥ 4.6 V enabled by synergistic structural and interfacial manipulation

Tuning surface chemistry to reduce the step-like degradation of LiCoO<sub>2</sub> at 4.6 V

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Interplay between multiple doping elements in high-voltage LiCoO<sub>2</sub>

High-entropy doping for high-voltage LiCoO 2 with enhanced electrochemical performances

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Ultrahigh‐voltage LiCoO2 at 4.7 V by Interface Stabilization and Band Structure Modification

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

Simultaneous Near‐Surface Trace Doping and Surface Modifications by Gas–Solid Reactions during One‐Pot Synthesis Enable Stable High‐Voltage Performance of LiCoO2

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

The Synergetic Effects of Ru and Al Co‐Doping for Improved Cyclability of LiCoO2 at High Voltages