Abstract:The efficient and cost-effective design of an integrated structure relying on a biogas-based fuel cell for hydrogen (H 2 ) production can represent a key step to attain the goal of net-zero carbon emissions. In this paper, waste heat and generated power of the hybrid configuration based on the biogas purification cycle and solid oxide fuel cell are utilized to produce H 2 . In the first H 2 production scenario, the waste heat and power are used in a copper-chlorine (Cu-Cl) thermochemical plant and a polymer electrolyte membrane (PEM) electrolysis unit. In the second H 2 production scenario, the power and waste heat are employed in a carbon dioxide power process and a PEM electrolyzer. Using an energy analysis, the thermal efficiency of the Cu-Cl/PEM-based system is 25.19% greater than that of the PEM-based system. The exergy efficiency of the Cu-Cl/PEM- and PEM-based systems are calculated at 48.10% and 40.12%, respectively. The prime cost of H 2 for the Cu-Cl/PEM-based system is 27.64% smaller compared to that of the PEM-based system. From the thermodynamic and economic perspectives, the first H 2 production scenario seems superior compared to the second one. Sensitivity analysis, machine learning, and multi-objective optimization approaches are used to extract the optimum conditions on the Pareto front. Biogas flow rate, cupric chloride change ratio, and inlet air to fuel cell as the inlet parameters and H 2 flow rate, net annual profit, and irreversibility as the output parameters in the machine learning analysis are considered. The parameters used in the machine learning analysis are obtained from the sensitivity analysis of the first scenario. Various decision criteria are employed to select the optimum operating conditions in the Pareto front. Using particle swarm optimization, the TOPSIS technique determines the operating conditions that have the highest H 2 production (i.e., 171.3 kg/h) and net annual profit (i.e., 3.407 MMUSD/yr). The fuzzy Bellman-Zadeh method introduces the conditions that have the lowest irreversibility for the first scenario. The uncertainty levels of the objective functions are examined using a Monte Carlo-based uncertainty quantification.

Modelling of hydrogen blending into the UK natural gas network driven by a solid oxide fuel cell for electricity and district heating system

Techno-economic analysis of a solid oxide fuel cell-based energy systems for decarbonising residential power and heat in the United Kingdom

Techno-Environmental Analysis of the Use of Green Hydrogen for Cogeneration from the Gasification of Wood and Fuel Cell

Technoeconomic and environmental performance assessment of solid oxide fuel cell-based cogeneration system configurations

Economic Modelling of Mixing Hydrogen with Natural Gas

A novel integration of a green power-to-ammonia to power system: Reversible solid oxide fuel cell for hydrogen and power production coupled with an ammonia synthesis unit

Development and Modelling of a Novel Electricity-Hydrogen Energy System Based on Reversible Solid Oxide Cells and Power to Gas Technology

Quantitative Assessment of Hydrogen Blending in a Gas Turbine-Based Plant for Supplying Residential Electricity, Water, and Cooling Load: A Techno-Economic-environmental Optimization

Efficient Hydrogen Production via Electro-Thermochemical Process and Solid Oxide Fuel Cell: Thermodynamics, Economics, Optimization, and Uncertainty Analyses

Numerical Simulation of an Internal Reforming Solid Oxide Fuel Cell Unit Fueled with Hydrogen-Natural Gas Mixtures

Influences of Hydrogen-Natural Gas Mixtures on The Performance of an Internal Reforming Solid Oxide Fuel Cell Unit: A Simulation Study

Dynamic study of hydrogen optimization in the hybrid boiler-fuel cells MCHP unit for eco-friendly house

Thermodynamic modelling and optimisation of a green hydrogen-blended syngas-fueled integrated PV-SOFC system

Combined Cycle Power Plant Economic Evaluation With Hydrogen and Ammonia As Alternate Fuel

Development and investigation of a hydrogen enriched natural gas fuelled HCCI engine for combined generation of power, heating, and cooling

System development for production and onsite use of hydrogen in wet-ethanol fueled HCCI engine for cogeneration of power and cooling

Integration of biomass gasification and O 2 /H 2 separation membranes for H 2 production/separation with inherent CO 2 capture: Techno-economic evaluation and artificial neural network based multi-objective optimization

Low-carbon fuelled MGT-CHP system coupled with PEM electrolyser and fuel cell units: A fuel flexibility and performance study

Development of a multigeneration system with integrated hydrogen production: A typical analysis

Comparative analysis of the thermodynamic performances of solid oxide fuel cell–gas turbine integrated systems for marine vessels using ammonia and hydrogen as fuels

A Concept of Combined Cooling, Heating and Power System Utilising Solar Power and Based on Reversible Solid Oxide Fuel Cell and Metal Hydrides