Abstract:The implementation of hydrogen as a fuel in internal combustion engines is widely considered a favorable optimal due to its zero-carbon emissions and high energy content. Heat transfer from engine cylinder walls has a major role on engine combustion, performance and emission characteristics. In this study, heat transfer analysis conducted by different heat transfer models and identify the best model to analyse the energy and exergy analysis of hydrogen enriched internal combustion engine. A series of experiments were conducted on a compressed natural gas internal combustion engine across varying hydrogen fractions, EGR ratios, engine speeds and load conditions to capture in-cylinder pressure data and heat transfer rate. The authors compared six distinct models for heat transfer based on absolute percentage errors of maximum pressure and indicated mean effective pressure. These models systematically incorporated into a quasi-dimensional combustion model (QDCM) on MATLAB for hydrogen-compressed natural gas engine, accounting for diverse operating conditions. Convective heat transfer models, including Woschni, Nusselt, Hohenberg, Han, Eichelberg, and Assanis correlations were employed. Comparative analyses were undertaken to identify the most precise correlation for predicting engine in-cylinder pressure and heat transfer rates with experimental results across a broad spectrum of operational conditions. The Woschni model, as presented, is most suitable for the QDCM of the hydrogen-compressed natural gas fuel blend. This suitability is indicated by the close alignment of Taylor length and turbulent intensity coefficients to 1, as well as the minimal absolute percentage error observed for indicated mean effective pressure. It is also observed that heat transfer rate is increased by increasing the engine load 25 %, 50 %, 75 % and 100 % as 49.57 J/deg, 129.26 J/deg, 245.35 J/deg and 250.62 J/deg respectively and heat transfer rate is decreased by increasing the speed of engine 1100 rpm, 1200 rpm, 1500 rpm and 1700 rpm as 137.34 J/deg, 134.21 J/deg, 95.33 J/deg and 48.57 J/deg respectively. The energy and exergy analyses revealed that elevating the engine load corresponds to a reduction in exergy destruction. Brake energy increased 15 % by increasing the load conditions from 25 % to 100 % and decreased 7 % by increasing the speed from 1100 rpm to 1700 rpm. Another significant finding from this study is that the values of both energy and exergy efficiencies were 38.42 % and 40.12 % respectively obtained by thermodynamic analyses.

Development and investigation of a hydrogen enriched natural gas fuelled HCCI engine for combined generation of power, heating, and cooling

System development for production and onsite use of hydrogen in wet-ethanol fueled HCCI engine for cogeneration of power and cooling

Investigation on novel natural gas fueled homogeneous charge compression ignition engine based combined power and cooling system

Energy and exergy analyses of a hydrogen added wet-ethanol fuelled HCCI engine-based cogeneration of power and refrigeration

Comparative Analysis of Different Heat Transfer Models, Energy and Exergy Analysis for Hydrogen-Enriched Internal Combustion Engine under Different Operation Conditions

Design of Hydrogen Enriched Compressed Natural Gas Engine Fuel System and Test Research

Computational Analysis of Ammonia-Hydrogen Blends in Homogeneous Charge Compression Ignition Mode of Engine Operation

Quantitative Assessment of Hydrogen Blending in a Gas Turbine-Based Plant for Supplying Residential Electricity, Water, and Cooling Load: A Techno-Economic-environmental Optimization

Experimental investigation and numerical assessment the effects of EGR and hydrogen addition strategies on performance, energy and exergy characteristics of a heavy-duty lean-burn NGSI engine

Progress in hydrogen enriched compressed natural gas (HCNG) internal combustion engines - A comprehensive review

Exergoeconomic analysis of a lean burn engine operating with ethanol and hydrogen addition

Natural Gas HCCI Engine Operation with Exhaust Gas Fuel Reforming

Experimental investigation of hydrogen combustion in a single cylinder PFI engine

Practical study of the effect of hydrogen enrichment on the performance characteristics of small two stroke engine

Parametric Optimization of Engine Performance and Emissions for Hydroxy Blended Gaseous Fuels

Hydrogen/diesel RCCI engine performance assessment at low load

Performance and Emission Characteristics of a Spark-Ignition (SI) Hydrogen-Enriched Compressed Natural Gas (HCNG) Engine Under Various Operating Conditions Including Idle Conditions

Energy-exergy analyses of hydrogen enriched⸺ diesel and blended biofuel ( Azolla pinnata macroalgae) on the dual fuel diesel engine

Estimation of efficiency, emission and exergy of a compression ignition engine under biohol-hydrogen strategies using artificial neural network

Water Fuel Development: Part 1 - Clean Energy Production From Water Splitting High Temperature Electrolysis Process in Hydrogen Internal Combustion Engines

Experimental investigation of the effect of hydrogen ratio on engine performance and emissions in a compression ignition single cylinder engine with electronically controlled hydrogen-diesel dual fuel system