Abstract:In the pathway towards decarbonization, hydrogen can provide valid support in different sectors, such as transportation, iron and steel industries, and domestic heating, concurrently reducing air pollution. Thanks to its versatility, hydrogen can be produced in different ways, among which steam reforming of natural gas is still the most commonly used method. Today, less than 0.7% of global hydrogen production can be considered low-carbon-emission. Among the various solutions under investigation for low-carbon hydrogen production, membrane reactor technology has the potential, especially at a small scale, to efficiently convert biogas into green hydrogen, leading to a substantial process intensification. Fluidized bed membrane reactors for autothermal reforming of biogas have reached industrial maturity. Reliable modelling support is thus necessary to develop their full potential. In this work, a mathematical model of the reactor is used to provide guidelines for their design and operations in off-design conditions. The analysis shows the influence of temperature, pressures, catalyst and steam amounts, and inlet temperature. Moreover, the influence of different membrane lengths, numbers, and pitches is investigated. From the results, guidelines are provided to properly design the geometry to obtain a set recovery factor value and hydrogen production. For a given reactor geometry and fluidization velocity, operating the reactor at 12 bar and the permeate-side pressure of 0.1 bar while increasing reactor temperature from 450 to 500 °C leads to an increase of 33% in hydrogen production and about 40% in HRF. At a reactor temperature of 500 °C, going from 8 to 20 bar inside the reactor doubled hydrogen production with a loss in recovery factor of about 16%. With the reactor at 12 bar, a vacuum pressure of 0.5 bar reduces hydrogen production by 43% and HRF by 45%. With the given catalyst, it is sufficient to have only 20% of solids filled into the reactor being catalytic particles. With the fixed operating conditions, it is worth mentioning that by adding membranes and maintaining the same spacing, it is possible to increase hydrogen production proportionally to the membrane area, maintaining the same HRF.

Integration of biomass gasification and O 2 /H 2 separation membranes for H 2 production/separation with inherent CO 2 capture: Techno-economic evaluation and artificial neural network based multi-objective optimization

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Process optimization of CO2membrane and cryogenic hybrid separation

Integration of an O2 Transport Membrane and a Biomass-Fueled SCO2 Cycle for Liquid CO2/freshwater/power Production: ANN-based Optimization and Techno-Economic Evaluation

Multi-objective optimization and techno-economic evaluation of a capture/separation/liquefaction scheme in a zero emission power/liquid N2/liquid CO2 production system based on biomass gasification and supercritical CO2 oxy-combustion cycle and ion transport membrane and Claude cycle

Triple-objective optimization using ANN+NSGA-II for an innovative biomass gasification-heat recovery process, producing electricity, coolant, and liquefied hydrogen

An Energy–Economic–Environment Tri-Objective Evaluation Method for Gas Membrane Separation Processes of H2/CO2

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

A combined approach-based techno-economic-environmental multi-optimization of a hydrogen generation system through waste biomass air-steam gasification

Efficient Hydrogen Production via Electro-Thermochemical Process and Solid Oxide Fuel Cell: Thermodynamics, Economics, Optimization, and Uncertainty Analyses

Design of a Biomass-Fueled System to Produce Hydrogen/power: Environmental Analyses and Bi-objective Optimization

Improvement and Optimization of a Combined Biomass-Feed Plant for Power and Hydrogen Production

Techno-economic-environmental Study and Artificial Intelligence-Assisted Optimization of a Multigeneration Power Plant Based on a Gas Turbine Cycle along with a Hydrogen Liquefaction Unit

Proposal and ANN-assisted optimization of a hybrid solar- and biomass-based energy system for electricity, freshwater, and hydrogen production

Using Machine Learning for Comparative Optimizing a Novel Integration of Molten Carbonate and Solid Oxide Fuel Cells with CO2 Recovering and Gasification

Multi-objective optimization of hydrogen production system based on the combined supercritical cycle and gas turbine plant

Optimization of Small-Scale Hydrogen Production with Membrane Reactors

Dual-objective Optimization of a Novel Hybrid Power Generation System Based on Hydrogen Production Unit for Emission Reduction

Multi‐objective optimization of a novel biomass‐based multigeneration system consisting of liquid natural gas open cycle and proton exchange membrane electrolyzer

Biomass possessing toward an efficient arrangement using a novel framework of waste-to-useful products: MOPSO optimization and comprehensive thermodynamic and cost analyses