Abstract:The efficient and cost-effective design of an integrated structure relying on a biogas-based fuel cell for hydrogen (H 2 ) production can represent a key step to attain the goal of net-zero carbon emissions. In this paper, waste heat and generated power of the hybrid configuration based on the biogas purification cycle and solid oxide fuel cell are utilized to produce H 2 . In the first H 2 production scenario, the waste heat and power are used in a copper-chlorine (Cu-Cl) thermochemical plant and a polymer electrolyte membrane (PEM) electrolysis unit. In the second H 2 production scenario, the power and waste heat are employed in a carbon dioxide power process and a PEM electrolyzer. Using an energy analysis, the thermal efficiency of the Cu-Cl/PEM-based system is 25.19% greater than that of the PEM-based system. The exergy efficiency of the Cu-Cl/PEM- and PEM-based systems are calculated at 48.10% and 40.12%, respectively. The prime cost of H 2 for the Cu-Cl/PEM-based system is 27.64% smaller compared to that of the PEM-based system. From the thermodynamic and economic perspectives, the first H 2 production scenario seems superior compared to the second one. Sensitivity analysis, machine learning, and multi-objective optimization approaches are used to extract the optimum conditions on the Pareto front. Biogas flow rate, cupric chloride change ratio, and inlet air to fuel cell as the inlet parameters and H 2 flow rate, net annual profit, and irreversibility as the output parameters in the machine learning analysis are considered. The parameters used in the machine learning analysis are obtained from the sensitivity analysis of the first scenario. Various decision criteria are employed to select the optimum operating conditions in the Pareto front. Using particle swarm optimization, the TOPSIS technique determines the operating conditions that have the highest H 2 production (i.e., 171.3 kg/h) and net annual profit (i.e., 3.407 MMUSD/yr). The fuzzy Bellman-Zadeh method introduces the conditions that have the lowest irreversibility for the first scenario. The uncertainty levels of the objective functions are examined using a Monte Carlo-based uncertainty quantification.

Design of a Biomass-Fueled System to Produce Hydrogen/power: Environmental Analyses and Bi-objective Optimization

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Dual-objective Optimization of a Novel Hybrid Power Generation System Based on Hydrogen Production Unit for Emission Reduction

Improvement and Optimization of a Combined Biomass-Feed Plant for Power and Hydrogen Production

Proposal and ANN-assisted optimization of a hybrid solar- and biomass-based energy system for electricity, freshwater, and hydrogen production

Multi-objective optimization of an innovative fuel cell and biomass power system for hydrogen synthesis and injection using thermochemical cycle

An Innovative Biomass-Driven Multi-Generation System Equipped with PEM Fuel Cells/vcl Cycle: Throughout Assessment and Optimal Design Via Particle Swarm Algorithm

Tri-objective optimization of electricity, fresh water, and hydrogen production in a biomass-driven trigeneration plant: Thermoeconomic and environmental evaluation

Design and evaluation of a novel plan for thermochemical cycles and PEM fuel cells to produce hydrogen and power: Application of environmental perspective

Assessing and optimizing a cutting-edge renewable-driven system for green hydrogen production/utilization, highlighting techno-economic and sustainability aspects

Multi‐objective optimization of a novel biomass‐based multigeneration system consisting of liquid natural gas open cycle and proton exchange membrane electrolyzer

Triple-objective optimization using ANN+NSGA-II for an innovative biomass gasification-heat recovery process, producing electricity, coolant, and liquefied hydrogen

Multi-objective Optimization, Comparison of Using Different Biomass Fuels in Hybrid Energy System for Electricity-Distilled Water Production Based on Supercritical CO2 and Humidification and Dehumidfication Cycles

Optimization next to environmental analysis of harvesting waste heat from a biomass-driven externally-fired gas turbine cycle for sub-zero cooling and production of hydrogen, freshwater, and hot water

Multi-objective optimization of hydrogen production system based on the combined supercritical cycle and gas turbine plant

Integrated management of mixed biomass for hydrogen production from gasification

Exergoeconomic evaluation of a new carbon-free hydrogen and freshwater production system based on biomass gasification process

Efficient Hydrogen Production via Electro-Thermochemical Process and Solid Oxide Fuel Cell: Thermodynamics, Economics, Optimization, and Uncertainty Analyses

Multi-aspect analysis and optimization of biomass-fueled multi-generation plant

Thermodynamic and thermoeconomic analysis and optimization of a renewable-based hybrid system for power, hydrogen, and freshwater production

Optimization of a near-zero-emission energy system for the production of desalinated water and cooling using waste energy of fuel cells