Abstract:The efficient and cost-effective design of an integrated structure relying on a biogas-based fuel cell for hydrogen (H 2 ) production can represent a key step to attain the goal of net-zero carbon emissions. In this paper, waste heat and generated power of the hybrid configuration based on the biogas purification cycle and solid oxide fuel cell are utilized to produce H 2 . In the first H 2 production scenario, the waste heat and power are used in a copper-chlorine (Cu-Cl) thermochemical plant and a polymer electrolyte membrane (PEM) electrolysis unit. In the second H 2 production scenario, the power and waste heat are employed in a carbon dioxide power process and a PEM electrolyzer. Using an energy analysis, the thermal efficiency of the Cu-Cl/PEM-based system is 25.19% greater than that of the PEM-based system. The exergy efficiency of the Cu-Cl/PEM- and PEM-based systems are calculated at 48.10% and 40.12%, respectively. The prime cost of H 2 for the Cu-Cl/PEM-based system is 27.64% smaller compared to that of the PEM-based system. From the thermodynamic and economic perspectives, the first H 2 production scenario seems superior compared to the second one. Sensitivity analysis, machine learning, and multi-objective optimization approaches are used to extract the optimum conditions on the Pareto front. Biogas flow rate, cupric chloride change ratio, and inlet air to fuel cell as the inlet parameters and H 2 flow rate, net annual profit, and irreversibility as the output parameters in the machine learning analysis are considered. The parameters used in the machine learning analysis are obtained from the sensitivity analysis of the first scenario. Various decision criteria are employed to select the optimum operating conditions in the Pareto front. Using particle swarm optimization, the TOPSIS technique determines the operating conditions that have the highest H 2 production (i.e., 171.3 kg/h) and net annual profit (i.e., 3.407 MMUSD/yr). The fuzzy Bellman-Zadeh method introduces the conditions that have the lowest irreversibility for the first scenario. The uncertainty levels of the objective functions are examined using a Monte Carlo-based uncertainty quantification.

Multi-objective optimization of an innovative fuel cell and biomass power system for hydrogen synthesis and injection using thermochemical cycle

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

An Innovative Biomass-Driven Multi-Generation System Equipped with PEM Fuel Cells/vcl Cycle: Throughout Assessment and Optimal Design Via Particle Swarm Algorithm

Dual-objective Optimization of a Novel Hybrid Power Generation System Based on Hydrogen Production Unit for Emission Reduction

Design and evaluation of a novel plan for thermochemical cycles and PEM fuel cells to produce hydrogen and power: Application of environmental perspective

Comprehensive optimization of an integrated energy system for power, hydrogen, and freshwater generation using high-temperature PEM fuel cell

Design of a Biomass-Fueled System to Produce Hydrogen/power: Environmental Analyses and Bi-objective Optimization

Exergoeconomic Analysis and Multi-Objective Optimization of an Integrated CHP System Based on Syngas-Fueled Planar Solid Oxide Fuel Cell

Multi‐objective optimization of a novel biomass‐based multigeneration system consisting of liquid natural gas open cycle and proton exchange membrane electrolyzer

Multi-aspect analysis and optimization of biomass-fueled multi-generation plant

Design and tri-criteria optimization of an MCFC based energy system with hydrogen production and injection: An effort to minimize the carbon emission

Improvement and Optimization of a Combined Biomass-Feed Plant for Power and Hydrogen Production

Multiobjective optimization and performance assessment of a PEM fuel cell-based energy system for multiple products

A Multi-Criteria Data-Driven Study/optimization of an Innovative Eco-Friendly Fuel Cell-Heat Recovery Process, Generating Electricity, Cooling and Liquefied Hydrogen

Thermodynamic modelling and optimisation of a green hydrogen-blended syngas-fueled integrated PV-SOFC system

Biomass co-fired combined cycle with hydrogen production via proton exchange membrane electrolysis and waste heat recovery: Thermodynamic assessment

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Integration of a Biomass-Fueled Proton Exchange Membrane Fuel Cell System and a Vanadium Redox Battery as a Power Generation and Storage System

Performance enhancement of integrated energy system using a PEM fuel cell and thermoelectric generator

Efficient Hydrogen Production via Electro-Thermochemical Process and Solid Oxide Fuel Cell: Thermodynamics, Economics, Optimization, and Uncertainty Analyses

4E Analysis and Tri-Dimensional Optimization of a Hybrid Energy System Based on Biogas from the Digester and High-Efficiency Fuel Cell: an Attempt to Reach Sustainability with Decreased Emission and Increased Efficiency