Abstract:The objective of this paper is to develop and evaluate a new integrated multigenerational system comprised of cryogenic air separation, hydrate-based desalination, combined cycle and oxyfuel power plants, carbon dioxide amine absorption, and transcritical carbon dioxide power cycle, employing liquefied natural gas cold energy. This integrated multi-generation system, applicable for liquefied natural gas importer terminals with access to seawater, produces approximately 2,533 MW net output power and 1,985 kg/h fresh water. In addition, this integrated multi-generation process produces 16,735,861 kg/h high-purity liquid oxygen (100 mol%), 4,773,633 kg/h liquid nitrogen with 99.71 mol% purity, more than 31,724,465 kg/h high-purity gaseous nitrogen (99.9 mol%), and 90,903,230 kg/h low-purity gaseous nitrogen (83.38 mol%). About 5907.3 MW of produced power is generated by liquefied natural gas expander. The performance of this system is evaluated by energetic methods. The results of energy analysis show the specific energy consumptions of the air separation products are 0.551 kW/kg and 1.93 kW/kg for liquid oxygen and nitrogen, respectively. Moreover, in the hydrate-based desalination subsystem, the specific energy consumption is 0.5 kW/m 3 for produced pure water. The combined cycle power plant includes two gas turbines, three steam turbines, and a three-pressure level heat recovery steam generation. The thermal efficiencies of gas turbine cycles (Bryton), steam turbine cycles (Rankine) and combined power cycles are 26.3 %, 29.6 %, and 36.2 %, respectively. The flue gases from power plants enter the carbon dioxide amine absorption subsystem. The separated carbon dioxide is used as a working fluid to produce 372.1 MW power in transcritical carbon dioxide cycle. The results of energy analysis for carbon dioxide amine absorption subsystem show that the specific energy consumption, the ratio of captured carbon dioxide per unit mass of liquefied natural gas and the carbon dioxide removal efficiency are 6.60 kW/kg, 33.91 kg/tone, and 90.06 %, respectively. Approximately 2,905,000 kg/h of liquid carbon dioxide is obtained as the byproduct of this multi-generation process. Additionally, sensitivity analysis is conducted to determine key parameters influencing the main energetic indexes. Finally, the amount of attainable regasified natural gas reaches 257,523 tone/h by applying this multi-generation system with total 86 % energy efficiency.

Integration of an O2 Transport Membrane and a Biomass-Fueled SCO2 Cycle for Liquid CO2/freshwater/power Production: ANN-based Optimization and Techno-Economic Evaluation

Multi-objective optimization and techno-economic evaluation of a capture/separation/liquefaction scheme in a zero emission power/liquid N2/liquid CO2 production system based on biomass gasification and supercritical CO2 oxy-combustion cycle and ion transport membrane and Claude cycle

Process optimization of CO2membrane and cryogenic hybrid separation

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Integration of biomass gasification and O 2 /H 2 separation membranes for H 2 production/separation with inherent CO 2 capture: Techno-economic evaluation and artificial neural network based multi-objective optimization

Oxygen Storage Incorporated Into Net Power And The Allam-Fetvedt Oxy-Fuel Sco2 Power Cycle - Technoeconomic Analysis

Reduction in Environmental CO2 by Utilization of Optimized Energy Scheme for Power and Fresh Water Generations Based on Different Uses of Biomass Energy.

Feasibility and environmental assessments of a biomass gasification-based cycle next to optimization of its performance using artificial intelligence machine learning methods

An innovative hybrid system for the polygeneration of power, heat, and liquid carbon dioxide using solid oxide fuel cell/electrolyzer technology and oxyfuel power generation cycle

Optimization of a biomass-driven Rankine cycle integrated with multi-effect desalination, and solid oxide electrolyzer for power, hydrogen, and freshwater production

Using Machine Learning for Comparative Optimizing a Novel Integration of Molten Carbonate and Solid Oxide Fuel Cells with CO2 Recovering and Gasification

Multi-objective Optimization, Comparison of Using Different Biomass Fuels in Hybrid Energy System for Electricity-Distilled Water Production Based on Supercritical CO2 and Humidification and Dehumidfication Cycles

Design and analysis of an innovative biomass-powered cogeneration system based on organic flash and supercritical carbon dioxide cycles

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Thermodynamic investigation of an integrated near-zero CO2 emission power generation system with SOFC, MGT, SCO2BC, and CO2 capture

Introducing and performance evaluation of a novel Multi-Generation process for producing Power, fresh Water, oxygen and nitrogen integrated with liquefied natural gas regasification and carbon dioxide removal process

Biomass possessing toward an efficient arrangement using a novel framework of waste-to-useful products: MOPSO optimization and comprehensive thermodynamic and cost analyses

A biogas-fired cogeneration (cooling and power) system combined with biomethane facilities: 3E evaluation, sensitivity analyses and optimization

The Optimal Design of Solid Oxide and Molten Carbonate Fuel Cells Integration with a CO2 Recycling Unit: an Attempt to Reach a Clean Transition Process

Intensification, optimization and economic evaluations of the CO2-capturing oxy-combustion CO2 power system integrated with the utilization of liquefied natural gas cold energy

Efficient Utilization of Enriched Oxygen Gas in Residential PEMFC-CHP System with Hydrogen Energy Storage