Study of a Palladium (Pd)/Aluminum-Doped Zinc Oxide (AZO) Hydrogen Sensor and the Kalman Algorithm for Internet-of-Things (IoT) Application

Wei-Cheng Chen,Jing-Shiuan Niu,I-Ping Liu,Cheng-Yu Chi,Shiou-Ying Cheng,Kun-Wei Lin,Wen-Chau Liu

DOI: https://doi.org/10.1109/ted.2020.3018084

IF: 3.1

2020-10-01

IEEE Transactions on Electron Devices

Abstract:A palladium (Pd) thin film is decorated on a radio frequency (RF) sputtered aluminum-doped zinc oxide (AZO) thin film to produce a hydrogen sensor. Due to the catalytic activity of the Pd metal, the studied thin film-based device shows remarkably enhanced hydrogen-sensing characteristics. Experimentally, a very high sensing response of $1.12times 10 ^{4}$ with a response time of 23 s is obtained under 1% H₂/air gas at 300 °C. Furthermore, even under an extremely low concentration of 40-ppb H₂/air, a sensing response of 0.17 is acquired. The optimal operating temperature of the studied device is 300 °C. A hypothesis is used to interpret the related hydrogen-sensing mechanism of the studied device. A thermodynamic analysis is employed to study the surface coverage of hydrogen molecules on the device's surface. Furthermore, for the application in wireless transmission of the Internet of Things (IoT), an interesting Kalman algorithm is used to reduce redundant data, save hardware costs, and reduce network congestion. The simulated results show that 93.9% of the redundant data can be removed. The studied device exhibits advantages of a simple structure, easy fabrication, low cost, a widespread sensing range of hydrogen concentration, a very high sensing response, and an extremely low detecting limit, as well as being suitable for IoT application.

engineering, electrical & electronic,physics, applied

What problem does this paper attempt to address?

The paper aims to address the shortcomings of hydrogen sensors in terms of performance, cost, and application range, particularly their suitability for Internet of Things (IoT) applications. Specifically:

1. **Enhancing Hydrogen Sensing Performance**: By depositing a palladium (Pd) film on aluminum-doped zinc oxide (AZO) thin films, the catalytic activity of palladium significantly enhances the hydrogen sensing characteristics. Experimental results show that in 1% H₂/air gas, the device exhibits a very high response (1.12×10⁴) at 300°C, with a response time of 23 seconds. Even at a very low concentration of 40 ppb H₂/air, a response of 0.17 can be achieved.

2. **Optimizing Operating Temperature**: The study found that the optimal operating temperature for the device is 300°C, providing clear operating conditions for practical applications.

3. **Explaining the Hydrogen Sensing Mechanism**: The paper proposes a hypothesis to explain the related hydrogen sensing mechanism and studies the coverage of hydrogen molecules on the device surface through thermodynamic analysis.

4. **Reducing Redundant Data and Improving IoT Application Efficiency**: To adapt to wireless transmission in IoT applications, the paper introduces the Kalman filtering algorithm to reduce redundant data, save hardware costs, and reduce network congestion. Simulation results show that 93.9% of redundant data can be removed without affecting the original sensing behavior.

In summary, the paper not only improves the performance of hydrogen sensors but also makes them more suitable for IoT applications by introducing advanced data processing algorithms, thereby addressing the limitations of existing sensors in terms of performance and application.