Abstract:Too high grinding force will lead to a large increase in specific grinding energy, resulting in high temperature in grinding zone, especially for the aerospace difficult cutting metal materials, seriously affecting the surface quality and accuracy. At present, the theoretical models of grinding force are mostly based on the assumption of uniform or simplified morphological characteristics of grains, which is inconsistent with the actual grains. Especially for non-engineering grinding wheel, most geometric characteristics of grains are ignored, resulting in the calculation accuracy that cannot guide practical production. Based on this, an improved grinding force model based on random grain geometric characteristics is proposed in this paper. Firstly, the surface topography model of CBN grinding wheel is established, and the effective grain determination mechanism in grinding zone is revealed. Based on the known grinding force model and mechanical behavior of interaction between grains and workpiece in different stages, the concept of grain effective action area is proposed. The variation mechanism of effective action area under the influence of grain geometric and spatial characteristics is deeply analyzed, and the calculation method under random combination of five influencing parameters is obtained. The numerical simulation is carried out to reveal the dynamic variation process of grinding force in grinding zone. In order to verify the theoretical model, the experiments of dry grinding Ti-6Al-4V are designed. The experimental results show that under different machining parameters, the results of numerical calculation and experimental measurement are in good agreement, and the minimum error value is only 2.1%, which indicates that the calculation accuracy of grinding force model meets the requirements and is feasible. This study will provide a theoretical basis for optimizing the wheel structure, effectively controlling the grinding force range, adjusting the grinding zone temperature and improving the workpiece machining quality in the industrial grinding process.

Study into grinding force in back grinding of wafer with outer rim

Research on the shape of ground wafer in Back Grinding of Wafer with Outer Rim

Simultaneous double side grinding of silicon wafers: A further investigation into grinding marks pattern

Theoretical Generalization and Research on the Mechanism of the Unsteady-State Grinding Technique

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Influences of Grinding Parameters on Forces in the Grinding of Microwave Ferrite Ceramic with Electroplated Diamond Wheel

A Force Model in Single Grain Grinding of Long Fiber Reinforced Woven Composite

Force modeling of vertical surface grinding considering wheel-workpiece contact geometry

Prediction and Measurement for Grinding Force in Wafer Self-Rotational Grinding

Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics

A New Grinding Force Model for Micro Grinding RB-SiC Ceramic with Grinding Wheel Topography As an Input

Investigation of the grinding temperature and subsurface quality of a novel point grinding wheel

Grinding force assessment in tangential ultrasonic vibration-assisted grinding gear: Analytical model and experimental verification

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy

A Grinding Force Model for Ultrasonic Assisted Internal Grinding (UAIG) of SiC Ceramics

A grinding force prediction model with random distribution of abrasive grains: considering material removal and undeformed chips

Analytical Modelling of Both Parallel and Cross Grinding with Arc-Shaped Wheel for Grinding-Induced Damage and Grinding Force

The Modelling and Experimental Verification of the Grinding Wheel Topographical Properties Based on the 'Through-the-process' Method

The Modelling and Analysis of Topographical Properties with the 'Through-the-process' Grinding Wheel Model

A grinding force model and surface formation mechanism of cup wheels considering crystallographic orientation

Evolution of undeformed chip thickness and grinding forces in grinding of K4002 nickel-based superalloy using corundum abrasive wheels