Abstract:This paper presents an experimental and theoretical study of surface generation in the ultra-precision grinding of hard and brittle materials. The study takes into account the material properties, the relative vibration between the grinding wheel and the workpiece, the machining parameters and the phase shift of the grinding process. The Taguchi approach is employed to study the influence of machining parameters on the surface quality and shows that the feed speed and rotational speed of the workpiece are key factors. Experiments have been conducted to study individual variables, and the results further show that the feed rate and the cross-feed distance have a significant effect on surface generation. It is found that the spirals around the central area of the workpiece are the primary mechanism for surface generation, which originates from the synchronous relative tool-work vibration. The integral part of the ratio of the rotational speed of the grinding wheel to rotational speed of the workpiece determines the number of spirals and its fractional part controls the spiral geometry. A theoretical model for predicting the single spiral generation has been developed to explain the accumulation of the phase shift and the geometry. The changeable feed speed near the end of grinding is also modelled, revealing the approximate straight lines around one circle in the central region. The simulated results indicate that the theoretical models and the ground surfaces are in close agreement. The scallop-height model is developed to calculate the influence of phase shift on surface quality, and it is found that the phase shift near the medium value can effectively improve surface quality. Finally, a comparison of different surface generation mechanisms in grinding mould steel, tungsten carbide (WC) and reaction bonded silicon carbide (RB-SiC) is made. It is interesting to note that the Spanzipfel effect contributes to the surface generation not only on ductile materials such as mould steel but also on brittle materials such as WC and RB-SiC. The Spanzipfel effect is the most significant in grinding mould steel. For WC and RB-SiC, the ground surface contains both a ductile region and a brittle region in the form of micro-fractures.

A grinding force model and surface formation mechanism of cup wheels considering crystallographic orientation

Study on the system matching of ultrasonic vibration assisted grinding for hard and brittle materials processing

A Force Model in Single Grain Grinding of Long Fiber Reinforced Woven Composite

Study on Grinding Force Model in Ultrasonic Vibration Assisted Grinding for Ductile Materials

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

A grinding force model in two-dimensional ultrasonic-assisted grinding of silicon carbide

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy

Modeling and Simulation of Grinding Surface Topography Considering Wheel Vibration

Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics

Force modeling of vertical surface grinding considering wheel-workpiece contact geometry

An experimental and theoretical analysis of surface generation in the ultra-precision grinding of hard and brittle materials

Forces prediction in micro-grinding single-crystal copper considering the crystallographic orientation

Prediction and Measurement for Grinding Force in Wafer Self-Rotational Grinding

Interference and grinding characteristics in ultra-precision grinding of thin-walled complex structural component using a ball-end grinding wheel

Study of 40Cr surface modification grinding force and temperature based on microstructure evolution mechanism

Grinding force model for ultrasonic assisted grinding of γ-TiAl intermetallic compounds and experimental validation

An analytical force and energy model for ductile-brittle transition in ultra-precision grinding of brittle materials

Analytical modeling of abrasive grain-workpiece cutting coefficient and experimental investigation on tangential ultrasonic vibration-assisted forming grinding gear

Theoretical and experimental investigation into the formation mechanism of surface waviness in ultra-precision grinding

Research on the surface modification and microstructure evolution during gear profile grinding based on cellular automaton

Grinding subsurface damage mechanism of nickel-based single crystal superalloy based on stress-strain