Abstract:Metastable (Ti,Al)N thin films with face-centered cubic (fcc) structure are widely applied to protect tools and components used in the machining industry for their high hardness and exceptional thermal stability. Alloying is a simple but powerful strategy to further improve the performance of (Ti,Al)N thin films. Here, the combination of experiments and ab initio calculations allowed us to further improve the mechanical properties, thermal stability, and oxidation resistance of arc-evaporated (Ti,Al)N films through the addition of Nb and Ta. The developed Ti 0.40 Al 0.53 Nb 0.07 N, Ti 0.34 Al 0.52 Nb 0.14 N, Ti 0.40 Al 0.53 Ta 0.07 N, and Ti 0.34 Al 0.50 Ta 0.16 N thin films show a single-phase fcc structure like Ti 0.46 Al 0.54 N. While the hardness ( H ) of as-deposited (Ti,Al,Nb)N thin films is similar to that of Ti 0.46 Al 0.54 N (30.1 ± 0.4 GPa), it increases to 33.2 ± 0.7 and 34.1 ± 1.1 GPa by alloying with 7 and 16 at.% Ta (metal fraction), respectively. Both alloying elements allow to retard the spinodal decomposition of (Ti,Al)N, as suggested by X-ray diffraction of vacuum-annealed samples. The (Ti,Al)N and (Ti,Al,Nb)N samples exhibit the onset of wurtzite (w-) AlN formation at ~1050 °C, which is postponed to ~1200 °C for the (Ti,Al,Ta)N thin films. Ab initio calculations suggest that age hardening of (Ti,Al)N is improved by Nb and Ta, with Nb being more effective than Ta. This is verified by experiments showing that Ti 0.40 Al 0.53 Nb 0.07 N (Ti 0.34 Al 0.52 Nb 0.14 N) and Ti 0.40 Al 0.53 Ta 0.07 N (Ti 0.34 Al 0.50 Ta 0.16 N) experience an increase of H to 34.7 ± 0.5 GPa (36.7 ± 0.7 GPa) and 35.8 ± 1.0 GPa (37.0 ± 1.1 GPa) when annealed at 1000 °C, compared to the 32.4 ± 0.7 GPa of Ti 0.46 Al 0.54 N annealed at 900 °C. The relative H increase is thus higher for (Ti,Al,Nb)N than for (Ti,Al,Ta)N. Furthermore, Nb and Ta also improve the oxidation resistance of (Ti,Al)N with Ta being more effective than Nb. Based on these results we can conclude that both Nb and Ta elements improve hardness, thermal stability, and oxidation resistance of (Ti,Al)N, with Nb providing more relative hardness gain but Ta providing higher absolute values.

Phase, mechanical property and corrosion resistance evaluation of W-Nb-Ta-Ti and W-Nb-Ta-Ti-N medium entropy alloy thin films

Thermal and corrosion properties of V-Nb-Mo-Ta-W and V-Nb-Mo-Ta-W-Cr-B high entropy alloy coatings

The influence of nitrogen content on the microstructure and properties of W-Ta-Cr-V-N refractory high-entropy nitrides

Fluence- and Thickness-Dependent Microstructure Evolutions in Ti-Zr-Hf-Nb-Ta High Entropy Alloy Thin Films

Ab initio supported development of Nb- and Ta-alloyed (Ti,Al)N thin films with improved thermal stability

Tuning Microstructure and Enhancing Mechanical Properties of Co-Ni-V-Al Medium Entropy Alloy Thin Films Via Deposition Power

Weak enthalpy-interaction-element-modulated NbMoTaW high-entropy alloy thin films

Microstructure, mechanical and tribological properties of NbMoWTaAg refractory high entropy films with nano-layered self-organization

Ultrahigh Specific Hardness of Co-Ni-V-Al Medium Entropy Alloy Thin Films

Laser-clad Nb(Ta)TiZr medium-entropy alloy coatings on pure Zr sheet: Microstructural characteristics, hardness and wear resistance

Microstructure evolution and mechanical properties of refractory high-entropy alloy nitride film

Structure, Composition and Mechanical Properties of Reactively Sputtered (tivcrtaw)nx High-Entropy Films

A Dual-Phase Fe-Co-Ni-Cr-Mn High Entropy Alloy Thin Film with Superior Strength and Corrosion-Resistance

Nickel content-dependent microstructure and mechanical properties of TiZrNbHfNi high entropy alloy thin films

Effects of Nb and Zr Alloying on the Microstructure, Mechanical Properties, and Corrosion Resistance of CoCrFeNi High-Entropy Alloys

Investigation of Mechanical Properties and Wear Resistance of A2/B2 Type Medium-Entropy Alloy Matrix Reinforced with Tungsten Particles by In-Situ Reaction

Structure and Thermomechanical Properties of Superlattice-Stabilized TiNbTaZrSiAlN High-Entropy Coating

Structural and Mechanical Properties of Multi-Element (alcrmotatizr)nx Coatings by Reactive Magnetron Sputtering

Microstructure and Friction Properties of AlCrTiVNbx High-Entropy Alloys via Annealing Manufactured by Vacuum Arc Melting

A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys

Effects of the carbon-to-nitrogen ratio on the microstructure and properties of (CrNbSiTiZr)CxNy high-entropy carbonitride films