Abstract:This study examines experimentally and numerically the thermo-mechanical behaviour of a novel Structural Insulated Panel (SIP) wall. The SIP UWall comprises of external cement boards and an internal core of expanded polystyrene and foamed concrete. Thermo-structural panels of size 600 × 2400 mm were first exposed to temperatures of up to 70 °C and flexo-compression to examine experimentally the behaviour of the novel SIP UWall vs traditional wall systems used in Southeast Asia, such as mon block walls, brick block walls, and lightweight block walls. The results indicate that the deflection of the SIP UWall was 42.0%, 23.8%, and 16.4% lower than that of traditional mon block, brick block, and lightweight block walls, respectively. To further assess the thermal performance of the above walls under real environmental conditions, four scale-down house units (1.5 × 1.5 × 2.4 m) were built in Chachoengsao province, Thailand. Results from the four scaled-down house units show that the use of SIP UWall reduced indoor temperatures by up to 5 °C compared to units constructed with mon block walls. Subsequently, the study proposes a novel approach to assess the thermo-mechanical behaviour of the panels using Fourier's law of heat transfer, Airy's stress function, and the principle of conservation of energy. The new approach explicitly considers the combined effect of applied thermal and mechanical loads. The approach is validated using the results obtained from the panel tests and the scale-down house units. It is shown that the proposed semi-empirical approach predicts well the thermo-mechanical behaviour on the wall panels tested in this study, with a Prediction/Experiment ratio of 1.06 and a Standard Deviation of 0.12. The tested wall panels and scaled-down hose units are subsequently modelled in Abaqus®. The results indicate that the SIP UWall exhibited superior thermal performance in terms of heat absorption, surpassing the mon block, brick block, and lightweight block panels by 19.4%, 15.7%, and 10.8%. The small errors in the Abaqus® predictions (always < 5%) indicate that the modelling approach adopted in this study was sufficiently accurate to simulate the thermal behaviour of the tested wall panels. This study contributes towards developing better assessment models and more energy-efficient construction materials in Southeast Asia.

Experimental evaluation of structural insulated panels outfitted with phase change materials

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Experimental assessment of concrete masonry units integrated with insulation and phase change material: A wall-pattern study

The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index

Impacts of PCM Location and Thickness on Dynamic Thermal Characteristics of External Walls for Residential Buildings

Numerical Study on the Effect of Incorporating Phase Change Materials in a Wall

Study on the heat transfer of a concrete wall outfitted with phase change materials

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Experimental study on the performance of an active novel vertical partition thermal storage wallboard based on composite phase change material with porous silica and microencapsulation

Thermo-Mechanical Behaviour of a New SIP Wall Under Axially Compressive Load

Fabrication and Building Energy-Saving Performance Evaluation of Polyethylene Glycol/polymethyl Methacrylate/expanded Graphite Thermal Enhanced Shape-Stable Phase Change Material

Numerical simulations on the thermal performance of ventilated walls with passive solar heating and latent heat storage in winter

Preparation and Investigation of a Prefabricated Salt Hydrate Phase Change Material Partition for Passive Solar Buildings

Experimental analysis of a radiant floor system incorporating phase change materials: Thermal performance and energy efficiency

Enhancing building wall thermal performance with phase change material and insulation: A comparative and synergistic assessment

Experimental and Numerical Performance Analysis of an Active Cooling Wall Module Equipped with Micro-encapsulated Phase Change Material

Development of Concrete Façade Sandwich Panels Incorporating Phase Change Materials

Experimental study on the thermal performance of PCM-based panels developed for exterior finishes of building walls

A multilayer panel in cork and natural phase change materials: thermal and energy analysis

Experimental and Numerical Investigation of Composite Phase Change Materials for Building Energy Saving

Energy, Economic and Environmental (3E) Analysis of Residential Building Walls Enhanced with Phase Change Materials