Abstract:Fusion reactors are limited by the magnetic field available to confine their plasma. The commercial fusion industry uses the larger magnetic field and higher operating temperature of the cuprate superconductor $\mathbf{YBa_{2}Cu_{3}O_{7-\delta}}$ (YBCO) in order to confine their plasma into a dense volume. A superconductor is a macroscopic quantum state that is protected from the metallic (resistive) state by an energy gap. Unfortunately, YBCO has an anisotropic gap, known as D-wave because it has the shape of a $\mathbf{d_{x^2-y^2}}$ chemical orbital. This D-wave gap means that poly-crystalline wire cannot be made because a few degree misalignment between grains in the wire leads to a drastic loss in its supercurrent carrying ability, and thereby its magnetic field limit. The superconductor industry has responded by growing nearly-single-crystal superconducting YBCO films on carefully prepared substrate tapes kilometers in length. Heroic development programs have made such tapes commercially available, but they are very expensive and delicate. MRI magnet superconductors, such as $\mathbf{NbTi}$ and $\mathbf{Nb_{3}Sn}$, are formed into poly-crystalline wires because they have an isotropic gap in the shape of an s chemical orbital (called S-wave) that makes them insensitive to grain misalignment. However, these materials are limited to lower magnetic fields and liquid-He temperatures. Here, we modified YBCO by doping the Y site with Ca and Ce atoms to form $\mathbf{(Y_{1-x-y}Ca_{x}Ce_{y})Ba_{2}Cu_{3}O_{7-\delta}}$, and show evidence that it changes to an S-wave gap. Its superconducting transition temperature, $\mathbf{T_c}$, of $\mathbf{\sim 70K}$, while lower than that of D-wave YBCO at $\mathbf{\sim 90K}$, is easily maintained using common, economic cryogenic equipment.

The Integration of YBCO Coated Conductors into Magnets and Rotating Machinery

High-Performance YBCO-Coated Superconductor Wires

Exfoliated YBCO filaments for second-generation superconducting cable

Development of YBCO Insert for a 25 T All Superconducting Magnet

Potential Major Improvement in Superconductors for High-Field Magnets

Implantation of Coated Superconducting Materials in the Synchronous Machine for Superconducting Energy Storage

Two-Dimensional Anisotropic Model of YBCO Coated Conductors

Lateral Displacement Influence on the Levitation Force of YBCO Coated Conductor Linear Bearings

Low-cost YBCO coated conductor technology

Development of persistent joints for superconducting Bi-2212 coils

Optimisation of the processing parameters for the fabrication of high-quality joints between Y-Ba-Cu-O single grain, bulk superconductors

Comparative study on the critical current performance of Bi-2223/Ag and YBCO wires in low magnetic fields at liquid nitrogen temperature

Development of Flux Pinning in YBa2Cu3O7-x Coated Conductor

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Metalorganic Deposition of YBCO Films for Second-Generation High-Temperature Superconductor Wires

Towards high-field applications: high-performance, low-cost iron-based superconductors

Superconducting materials: Challenges and opportunities for large-scale applications

High-Tc Superconducting Bearings Design: Towards High-Performance Machines

Status of high temperature superconductor based magnets and the conductors they depend upon

Concept of Multiply Connected Superconducting Tapes

Design Development and Analysis of a Partially Superconducting Axial Flux Motor Using YBCO Bulks