Abstract:Most optical spectropolarimeters built to date operate as long-slit or point-source instruments; they are inefficient for observations of extended objects such as galaxies and nebulae. 2D spectropolarimetry technique development is a major challenge in astronomical instrumentation. At the South African Astronomical Observatory (SAAO) FiberLab, we are developing a spectropolarimetry capable Integral Field front-end called FiberPol(-6D) for the existing SpUpNIC spectrograph on the SAAO 1.9 m telescope. SpUpNIC is a general purpose 2 arc-minute long-slit spectrograph with a grating suite covering the wavelength range from 350 to 1000 nm and at spectral resolutions between 500 and 6000. FiberPol generates 6D observational data: x-y spatial dimensions, wavelength, and the three linear Stokes parameters $I$, $q$ and $u$. Using a rotating half-wave plate and a Wollaston prism, FiberPol executes two-channel polarimetry, and each channel is fed to an array of 14 fibers, corresponding to a field of view of $10\times20~arcseconds^2$ sampled with 2.9 arcsecond diameter fiber cores. These fiber arrays are then rerouted to form a pseudo-slit input to SpUpNIC. FiberPol aims to achieve a polarimetric accuracy of 0.1 % per spectral resolution bin. Further, it can also function as a non-polarimetric integral-field unit. The instrument design has been completed and it is currently being assembled and characterized in the lab. It is scheduled for on-sky commissioning in the second half of 2024. In this paper, we present the scientific and technical goals of FiberPol, its overall design and initial results from the lab assembly and testing. FiberPol is a low cost technology demonstrator, and the entire system predominantly employs small size, commercial off-the-shelve optics and optomechanical components. It can be modified and replicated for use on any existing spectrograph, especially on bigger telescopes.

The Fan Observatory Bench Optical Spectrograph (FOBOS)

The Multi-Object, Fiber-Fed Spectrographs for SDSS and the Baryon Oscillation Spectroscopic Survey

WFOS Instrument Trade Study: Slicer Vs. Fiber Instrument Concept Designs and Results (conference Presentation)

Single mode, extreme precision Doppler spectrographs

First on-sky results of a FIOS prototype, a Fabry Perot Based Instrument for Oxygen Searches

The Burke-Gaffney Observatory: A fully roboticized remote-access observatory with a low resolution spectrograph

Experiments by PM Spectroscopy in Resonator Fiber Optic Gyro

Mapping the aberrations of a wide-field spectrograph using a photonic comb

Observing with HST below 1150Å: Extending the Cosmic Origins Spectrograph Coverage to 900Å

FOCCoS for Subaru PFS

The optical performance of frequency selective bolometers

FOS: A fully integrated open-source program for Fast Optical Spectrum calculations of nanoparticle media

Design and Development of WFOS, the Wide-Field Optical Spectrograph for the Thirty Meter Telescope

CAFE: Calar Alto Fiber-fed Echelle spectrograph

Fiber Optical Cable and Connector System (FOCCoS) for PFS/Subaru

Prompt Detection of Fast Optical Bursts with the Vera C. Rubin Observatory

Scanning Fabry--Perot Interferometer of the 6-m SAO RAS Telescope

Betelgeuse scope: Single-mode-fibers-assisted optical interferometer design for dedicated stellar activity monitoring

The Simons Observatory: Overview of data acquisition, control, monitoring, and computer infrastructure

FiberPol-6D: Spectropolarimetric Integral Field mode for the SAAO 1.9 m Telescope using fibers

High-resolution wide-band Fast Fourier Transform spectrometers