Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

Fiber Optical Cable and Connector System (FOCCoS) for PFS/Subaru

FOCCoS for Subaru PFS

Multi-fibers connectors systems for FOCCoS-PFS-Subaru

Progress with the Prime Focus Spectrograph for the Subaru Telescope: a massively multiplexed optical and near-infrared fiber spectrograph

Prime Focus Spectrograph (PFS) for the Subaru telescope: Its start of the last development phase

Metrology Camera System of Prime Focus Spectrograph for Subaru Telescope

Prime Focus Spectrograph - Subaru's future -

Polish device for FOCCoS/PFS slit system

Prime Focus Spectrograph (PFS) for the Subaru Telescope: a Next-Generation Facility Instrument of the Subaru Telescope Has Started Coming

Developments in high-density Cobra fiber positioners for the Subaru Telescope's Prime Focus Spectrograph

Prime Focus Spectrograph (PFS) for the Subaru Telescope: Overview, Recent Progress, and Future Perspectives

The survey operation software system development for Prime Focus Spectrograph (PFS) on Subaru Telescope

Design and performance of a F/#-conversion microlens for Prime Focus Spectrograph at Subaru Telescope

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

Current status of the Spectrograph System for the SuMIRe/PFS

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

The Fibre Resolved opticAl and Near-ultraviolet Czerny-Turner Imaging Spectropolarimeter (FRANCIS)

Research of Fiber Position Measurement by Multi Ccd Cameras

FiberPol-6D: Spectropolarimetric Integral Field mode for the SAAO 1.9 m Telescope using fibers

The near infrared camera for the Subaru Prime Focus Spectrograph

Suppresion of Self-Phase Modulation in a Laser Transfer System using Optical Fiber on the Subaru Telescope