Abstract:This study investigates the potential of long-wave infrared (LWIR) free-space optical (FSO) transmission using multilevel signals to achieve high spectral efficiency. The FSO transmission system includes a directly modulated-quantum cascade laser (DM-QCL) operating at 9.1 μm and a mercury cadmium telluride (MCT) detector. We conduct small-signal characterization of the system, including the DM-QCL chip and MCT detector, evaluating the end-to-end response of both components and all associated electrical elements. For large-signal characterization, we employ a range of modulation formats, including on-off keying (OOK), 4-level pulse amplitude modulation (PAM4), and 6-level PAM (PAM6), with the objective of optimizing both the bit rate and spectral efficiency of the FSO transmission by applying pre- and post-processing equalization. At 15˚C, the studied LWIR FSO system achieves gross rates of 16 Gbps with an OOK signal and 18 Gbps with PAM4, both below the 6.25% overhead hard decision-forward error correction (6.25%-OH HD-FEC) limit, and 10 Gbps OOK below the KR-FEC limit. At 20˚C, we obtain 15 Gbps with OOK, 18 Gbps with PAM4, and 17.4 Gbps with PAM6. Furthermore, we evaluate the BER performance as a function of the decision feedback equalization (DFE) tap number to explore the role of equalization in enhancing signal fidelity and reducing errors in FSO transmission. Our findings accentuate the competitive potential of DM-QCL and MCT detector-based FSO transceivers with digital equalization for the next generation of FSO communication systems.

The optical performance of frequency selective bolometers

High Spectral Efficiency Long-Wave Infrared Free-Space Optical Transmission with Multilevel Signals

Advancing LWIR FSO Communication Through High-Speed Multilevel Signals and Directly Modulated Quantum Cascade Lasers

The Simons Observatory: Differentiating Thermal and Optical Effects in Superconducting Transition-Edge Sensing Bolometers

High-sensitivity transition-edge-sensed bolometers: improved speed and characterization with AC and DC bias

Optical performance of prototype horn-coupled TES bolometer arrays for SAFARI

Wide-Range Bolometer with RF Readout TES

A Frequency Selective Surface based focal plane receiver for the OLIMPO balloon-borne telescope

Ultra-high Sensitivity Optical Sensors Based on Cascaded Two Fabry-Perot Interferometers

Simulation and Measurement of Out-of-Band Resonances for the FDM Readout of a TES Bolometer

Broadband Tunability of Polarization-Insensitive Absorber Based on Frequency Selective Surface

The Simons Observatory: Design, Optimization, and Performance of Low-Frequency Detectors

Frequency Multiplexed SQUID Readout of Large Bolometer Arrays for Cosmic Microwave Background Measurements

Performance of a Low-Parasitic Frequency-Domain Multiplexing Readout

Frequency stability of the mode spectrum of broad bandwidth Fabry-Perot interferometers

22/43 GHz low-insertion-loss dual-polarized multi-layer bandpass frequency selective surfaces for millimeter astronomy

Frequency division multiplexing readout of a transition edge sensor bolometer array with microstrip-type electrical bias lines

Status of SuperSpec: A Broadband, On-Chip Millimeter-Wave Spectrometer

A Compact Second-Order Frequency Selective Surface With Broadband Response

High-Efficiency and Low-Noise Detectors for the Upgraded CLASS 90 GHz Focal Plane

Digital Frequency Domain Multiplexer for mm-Wavelength Telescopes