Abstract:Millimetre-wave observations represent an important tool for Cosmology studies. The Line Intensity Mapping (LIM) technique has been proposed to map in three dimensions the specific intensity due to line (e.g. [CII], CO) emission, for example from the primordial galaxies, as a function of redshift. Hyper-spectral integrated devices have the potential to replace the current Fourier transform, or the planned Fabry-Perot-based instruments operating at millimetre and sub-millimetre wavelengths. The aim is to perform hyper-spectral mapping, with a spectral resolution R= 100-1000, over large, i.e. thousands of beams, instantaneous patches of the Sky. The innovative integrated device that we have developed allows avoiding moving parts, complicated and/or dispersive optics or tunable filters to be operated at cryogenic temperatures. The prototype hyper-spectral focal plane is sensitive in the 75-90GHz range and contains nineteen horns for sixteen spectral-imaging channels, each selecting a frequency band of about 0.1GHz. For each channel a conical horn antenna, coupled to a planar superconducting resonant absorber made of thin aluminium, collects the radiation. A capacitively coupled titanium-aluminium bilayer Lumped Element Kinetic Inductance Detector (LEKID) is then in charge of dissipating and sensing the super-current established in the resonant absorber. The prototype is fabricated with only two photo-lithography steps over a commercial mono-crystalline sapphire substrate. It exhibits a spectral resolution of about 800. The optical noise equivalent power of the best channels is in the observational relevant 4E-17W/sqrt(Hz) range. The average sensitivity of all the channels is around 1E-16W/sqrt(Hz). The device, as expected from 3-D simulations, is polarisation-sensitive, paving the way to spectro-polarimetry measurements over very large instantaneous field-of-views.

Status of SuperSpec: A Broadband, On-Chip Millimeter-Wave Spectrometer

Low Noise Titanium Nitride KIDs for SuperSpec: A Millimeter-Wave On-Chip Spectrometer

Ultra-broadband Microfiber-Coupled Superconducting Single-Photon Detector

A millimetre-wave superconducting hyper-spectral device

Fabrication Development for SPT-SLIM, a Superconducting Spectrometer for Line Intensity Mapping

WSPEC: A waveguide filter-bank focal plane array spectrometer for millimeter wave astronomy and cosmology

A Vacuum Waveguide Filter Bank Spectrometer for Far-Infrared Astrophysics

The Simulation and Design of an On-Chip Superconducting Millimetre Filter-Bank Spectrometer

Novel High‐Resolution and Large‐Bandwidth Micro‐Spectrometer Using Multi‐Input Counter‐Propagating Arrayed Waveguide Grating and Dual‐Wavelength Grating Coupler on Silicon on Insulator

HighSpec: A High-Resolution Spectrograph for the MAST Telescope Array

Superconducting Single-Photon Spectrometer with 3D-Printed Photonic-Crystal Filters

An optics-free single-pixel spectrometer using a broadband and tunable dynamic detector

The Simons Observatory: Production-level Fabrication of the Mid- and Ultra-High-Frequency Wafers

An optics-free computational spectrometer using a broadband and tunable dynamic detector

A High-Performance Spectrometer with Two Spectral Channels Sharing the Same BSI-CMOS Detector.

Optimization of an Optical Testbed for Characterization of EXCLAIM μ-Spec Integrated Spectrometers

Broadband Heterodyne SIS Spectrometer Prototype: First Results

Broadband on-chip single-photon spectrometer

A 10.24-GHz-wide digital spectrometer array system for LMT-FINER: system design and laboratory performance verification

The Design of The CCAT-prime Epoch of Reionization Spectrometer Instrument

Superconducting Integrated Terahertz Spectrometers