Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

WFOS Instrument Trade Study: Slicer Vs. Fiber Instrument Concept Designs and Results (conference Presentation)

Design and Development of WFOS, the Wide-Field Optical Spectrograph for the Thirty Meter Telescope

WST -- Widefield Spectroscopic Telescope: addressing the instrumentation challenges of a new 12m class telescope dedicated to widefield Multi-object and Integral Field Spectroscopy

High Spectral Efficiency Long-Wave Infrared Free-Space Optical Transmission with Multilevel Signals

Advancing LWIR FSO Communication Through High-Speed Multilevel Signals and Directly Modulated Quantum Cascade Lasers

WST -- Widefield Spectroscopic Telescope: design of a new 12m class telescope dedicated to widefield Multi-object and Integral Field Spectroscopy

Computational seismic analysis of optical instrument structures - Computational analysis of seismic response of wide-field optical spectrograph structures in large telescopes.

WSPEC: A waveguide filter-bank focal plane array spectrometer for millimeter wave astronomy and cosmology

WST -- Widefield Spectroscopic Telescope: Motivation, science drivers and top-level requirements for a new dedicated facility

Progress with the Prime Focus Spectrograph for the Subaru Telescope: a massively multiplexed optical and near-infrared fiber spectrograph

Sciences with the 2.5-meter Wide Field Survey Telescope (WFST)

FiberPol-6D: Spectropolarimetric Integral Field mode for the SAAO 1.9 m Telescope using fibers

Science with the 2.5-Meter Wide Field Survey Telescope (WFST)

FOCCoS for Subaru PFS

The Wide-field Spectroscopic Telescope (WST) Science White Paper

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit

Fiber Optical Cable and Connector System (FOCCoS) for PFS/Subaru

Prime Focus Spectrograph (PFS) for the Subaru Telescope: Overview, Recent Progress, and Future Perspectives

The wide-field, multiplexed, spectroscopic facility WEAVE: Survey design, overview, and simulated implementation

Lightweight Cylindrical Composite Shell Structures to Support Optical Instruments in Extremely Large Telescopes: A Case Study