Abstract:Corrosion of reinforcement in concrete civil structures poses a significant challenge to their integrity and durability. To ensure the safety and longevity of such structures, effective monitoring strategies that can accurately detect, localise and assess the progression of damage are crucial. For most existing concrete structures, this is often challenging, as damage is already present when the monitoring campaign starts. In addition, reinforced concrete structures can be subject to a combination (or a succession) of corrosion and load-induced damage. By combining multiple measurement techniques, a more accurate and reliable condition assessment of concrete civil structures can be aimed for. This paper presents a comprehensive experimental study of the combination of vibration-based monitoring (VBM) and acoustic emission (AE) sensing techniques during progressive load tests of corroded reinforced concrete beams. Five beams were subjected to a cyclic four-point bending test, three of which were previously corroded while two beams remained undamaged prior to the mechanical loading. The influence of pre-existing corrosion damage and corresponding longitudinal concrete cracking on the modal characteristics (natural frequencies and strain mode shapes) and AE outcomes is investigated during the four-point bending test. The monitoring results obtained by both techniques are shown to be influenced by the pre-existing longitudinal concrete cracking caused by the reinforcement corrosion. Lower AE activity and a lower reduction in natural frequencies is observed for corroded RC beams during load bending tests when compared to uncorroded specimens. In addition, bending cracks occurring within the corroded zones appear to have a very limited effect on the identified strain mode shapes. These observations could possibly result in an underestimation of the damage and corresponding overestimation of the load-carrying capacity, as the corrosion damage conceals the occurrence of bending cracking on the AE and VBM outcomes.

Damage detection of prestressed concrete beams affected by shear and flexure cracks through vibration monitoring

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Flexural Damage Diagnosis in Reinforced Concrete Beams Using a Wireless Admittance Monitoring System-Tests and Finite Element Analysis

Structural Damage Detection Based on Structural Macro-Strain Mode Shapes Extracted From Non-Stationary Output Responses

Detection of damage in laminated composite structures using transverse shear mode

Nondestructive Monitoring Techniques for Crack Detection and Localization in RC Elements

Vibration monitoring and acoustic emission sensing during progressive load tests of corroded reinforced concrete beams

Operational modal analysis using lifted continuously scanning laser Doppler vibrometer measurements and its application to baseline-free structural damage identification

Detecting Multiple Damages in UHPFRC Beams through Modal Curvature Analysis

Damage detection in a fixed-fixed beam using natural frequency changes

Structural performance assessment of full-scale masonry wall systems using operational modal analysis: Laboratory testing and numerical simulations

Multistage Damage Detection Method Based on the Defect Mode for Periodically Stiffened Panels

Intensity Analysis Method of Acoustic Emission Signals for the Damage Monitoring of Post-Tensioned Concrete Beams

Early detection of structural damage in UHPFRC structures through the combination of acoustic emission and ultrasonic stress wave monitoring

Experimental strain modal analysis for beam-like structure by using distributed fiber optics and its damage detection

A simple method for enhanced vibration-based structural health monitoring

Efficacy of PZT Sensors Network Different Configurations in Damage Detection of Fiber-Reinforced Concrete Prisms under Repeated Loading

Damage Detection in Nonlinear Elastic Structures Using Individual Sensors

Application of modal-based damage-detection method to locate and evaluate damage in timber beams

Influence of Sensor Position and Low-Frequency Modal Shape on the Sensitivity of Vibro-Acoustic Modulation for Impact Damage Detection in Composite Materials