Abstract:The localization of multiple slight damage in engineering structure is very important and difficult in structural health monitoring. Slight damage in engineering structure will result in small variation of the modal parameters such as natural frequencies and mode shapes (also called displacement modes). Many of the methods based on displacement modes, such as flexibility approach, are insensitive to slight damage, and thus may fail to accurately locate the slight damage. Strain is the derivative of displacement and thus a slight variation in displacement data will be amplified by the differential process, resulting in a significant variation in strain modes. Compared with displacement modes, strain modes are claimed to be more sensitive to slight damage. On this premise, a strain modal flexibility method is presented to locate the slight damage. When multiple slight damage appears in a structure, dynamic response of the structure becomes more complex considering the relative position and degrees of damage. A data fusion (DF) technique, which based on Dempster−Shafer’s evidence theory combines information from different data sources, is introduced to improve the efficiency of the damage indicators in locating multiple damage. Thus, a novel method, which utilizes strain modal flexibility method combined with DF technique, is proposed to locate multiple slight damage. Numerical simulations on different steel beam models demonstrate that the proposed method can obtain more accurate results compared with traditional damage localization method. Experimental cases on a steel cantilever beam model verify the effectiveness of the proposed method in locating multiple slight damage.

Application of modal-based damage-detection method to locate and evaluate damage in timber beams

Experimental Study of Structural Damage Identification Based on Modal Parameters and Decay Ratio of Acceleration Signals

Structural Damage Identification using Modal Data. I: Simulation Verification

Damage Assessment of Structures Using Modal Test Data

Structural Damage Identification using Modal Data. II: Test Verification

A Strain Modal Flexibility Method to Multiple Slight Damage Localization Combined with a Data Fusion Technique

Detecting Multiple Damages in UHPFRC Beams through Modal Curvature Analysis

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Damage detection based on accelerometers and computer vision measurements of moving load-induced structural responses

A New Method of Obtaining Modal Sensitivity for Damage Location in Beam Structure

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage detection in a fixed-fixed beam using natural frequency changes

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Damage Detection Method in Complicated Beams with Varying Flexural Stiffness

Experimental strain modal analysis for beam-like structure by using distributed fiber optics and its damage detection

Damage Identification Dependence on Number of Vibration Modes Using Mode Shape Curvature Squares

Changes of modal properties of simply-supported plane beams due to damages

Modal strain energy based structural damage localization for offshore platform using simulated and measured data

Vibration-based Damage Identification Methods: A Review and Comparative Study

Structural damage identification using static test data and changes in frequencies

A Modal Displacement Unevenness Coefficient Method for Multi-Point Matrix Damage Detection in Composite Laminates