Abstract:A transparent conductive oxide (TCO) should have a combination of high electrical conductivity and optical transmission property to fulfill the challenging demands of industrial applications. So far, doped TCOs have been mostly considered to fulfill the technological challenges. In this study, we demonstrate that indium oxide (In2O3) thin films without intentional doping can be deposited with high crystallinity under specific film growth conditions leading to thin films with high mobility, high electrical conductivity, and high transmittance. In2O3 thin films have been deposited by reactive pulsed direct current magnetron sputtering (pulsed DCMS) from an indium target on substrates in a temperature range from room temperature (RT) to 600 °C. Detailed investigations on In2O3 thin films are performed and the film properties such as crystallinity, microstructure, chemical bonding states, electrical and optical properties are revealed. Enhanced plasma density and ionization degree provided by the employed reactive pulsed DCMS and the intentional substrate heating during the thin film deposition give possibility to deposit highly crystalline thin films which are preferentially oriented in (222) direction. The substrate heating enhances the crystallinity of the grown films up to a certain optimum temperature: 400 °C. When the substrate temperature is above 400 °C, the carrier concentration and mobility decrease due to the grain refinement effect caused by growth competition of grains in different orientations. The films grown at 400 °C indicate the presence of high oxygen vacancy concentrations, which can directly be associated with a high charge carrier concentration despite the lack of intentional doping. The undoped In2O3 films in this study grown at 400 °C show highly promising and competitive electrical properties such as low resistivity of 1.28 × 10-4 Ω⋅cm and the high carrier mobility of 69 cm2/Vs. The average transmittance of the In2O3 films with the highest conductivity is found to be greater than 80% in the visible to the near-infrared spectral region owing to an enhancement in the carrier mobility and an optical bandgap in the range from 3.61 eV to 3.77 eV.

Substitution of transparent conducting oxide thin films for indium tin oxide transparent electrode applications

Eco-Friendly, Water-Induced In2O3 Thin Films for High-Performance Thin-Film Transistors and Inverters

The ZnO-In2O3 Oxide System as a Material for Low-Temperature Deposition of Transparent Electrodes

Development of Novel TiO2-Based Transparent Conducting Oxide Films

Deposition of IGZO or ITZO Thin Films by Co-Sputtering of IZO and GZO or ITO Targets

Progress in the Synthesis and Application of Transparent Conducting Film of AZO (ZnO:Al)

Transparent conducting oxide films for thin film silicon photovoltaics

Chemical and Thin-Film Strategies for New Transparent Conducting Oxides

Improvement of Transparent Conductive Properties of GZO/Cu/GZO Tri-Layer Films by Introducing H2 into Sputtering Atmosphere

Effects of Thallium–Aluminum‐Codoped Zinc Oxide Thin Film as a New Transparent Conducting Oxide

Effect of Film Thickness on Properties of Al-Doped Zno Film As Transparent Conducting Electrodes in Oleds

Atomic Layer-Deposited Al-Doped ZnO Thin Films for Display Applications

Gallium doped zinc oxide thin films as transparent conducting oxide for thin-film heaters

Low-roughness and easily-etched transparent conducting oxides with a stack structure of ITO and IZO

Ga-concentration-dependent optical and electrical properties of Ga-doped ZnO thin films prepared by low-temperature atomic layer deposition

High-quality transparent conductive indium oxide film deposition by reactive pulsed magnetron sputtering: Determining the limits of substrate heating

High-performance fully transparent Ti-Zn-O thin film transistors

Optical and structural properties of Al-doped ZnO thin films by sol gel process

Laminated indium-oxide/molybdenum-oxide nanocomposites for high-work-function electrodes in organic photovoltaics and capacitor devices

Electrical and optical performance of transparent conducting oxide films deposited by electrostatic spray assisted vapour deposition

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature